Steam Generation & Distribution

Steam Generation & Distribution

Today we have completely range of product for steam generation process, including feed water control valve, steam trap, blowdown valve. and other product related and most common for using in these plant like bellow seal globe valve.

Related Product

Steam Generation & Distribution

Forged Steel Gate Valve

Outside Screw and Yoke(OS&Y), Two Piece self aligning packing gland Bolted bonnet with spiral-wound gasket, Integral backseat

Design | Test : API 602 | API 598
Connection : SW | BW, Thread & Flange
Material : Forged Steel, Stainless Steel
Full or Regular Port, Extended Stem or Below Seal
Welded or Pressure Seal Bonnet, Locking Device

Blowdown Valve

Blowdown valve use for removal of water from a boiler. Its purpose is to control boiler water parameters within prescribed limits to minimize scale, corrosion, carryover, and other specific problems. There are two principal types of blowdown, they are intermittent and continuous blowdown valve.

Material : Forged steel, Carbon steel
Pressure : Up to Class 2500
Size Range : Up to 6″ | DN 150
End Connection : Butt weld, Socket weld, Flange
Actuator : Lever, Electrical & Pneumatic Actuator

Bellow Seal Globe Valve

Bellows seal globe valve feature a formed multiply bellows welded to the stem and to the bottom of the bonnet, Bellows are available in many materials for virtually all corrosive chemical applications.

Cast Bellow Seal Globe Valve
Cast Bellow Seal Y Globe Valve
Forged Bellow Seal Globe Valve
Forged Bellow Seal Globe Valve
Bolted Bonnet Bellow Globe Valve

Three Way Control Valve

Three way control valve is designed for general service applications including both the mixing and diverting. Functioning of a three way valve is significantly different from other types of valves, the three way valve can control the fluid exchange between three separate transfer line.

Diameter : DN 20 - DN 500
Pressure Range : PN16 - PN40
Temp Max : -20C up t0 350C
Actuator : Electric & Pneumatic Actuator

Pressure Reducing Valve

Pressure Reducing Valve is a device for automatically maintaining a diminished pressure of steam, air, gas in a pipe, or other receiver, which is fed from a boiler or pipe in which the pressure is higher than is desired in the receiver. The valves can be direct acting or pilot operated.

Sizes : 2” to 20” (Dn 50 to 500)
Connection : Threaded or Flange
Material : Ductile Iron, Cast Iron, Bronze, Carbon steel


a brand that suits the power plant industry.

More Details