Safety Relief Valve
Medenus Safety Relief Valve
Medenus SL 10
Safety Relief Valve
The safety relief valve SL 10 is mainly used to blow off a small amount of gas when the pressure is slowly increasing and to avoid that the safety shut-off valves releases. The safety relief valve SL 10 is suitable for gases in accordance with DVGW Code of Practice G260/262 and all other neutral and non-corrosive gases (others upon request).
Other Model Medenus Valve
- Medenus Safety Shut-Off Valve
- Medenus Gas Ball Valve
- Medenus Turbine Meters
Other Medenus Valve
Detail Specification
| Nominal size | Rp 1“ (DN 25), Rp 1½“ (DN 40), Rp 2“ (DN 50) (NPT thread on request) |
| Model | Integral pressure-tight (IS) |
| Materials | Al cast alloy |
| Temperature | -20°C to +60°C |
| Connection type | Internal thread acc. to EN 10226-1 |
Medenus Safety Relief Valve
Medenus SL 10
Safety Relief Valve
The safety relief valve SL 10 is mainly used to blow off a small amount of gas when the pressure is slowly increasing and to avoid that the safety shut-off valves releases. The safety relief valve SL 10 is suitable for gases in accordance with DVGW Code of Practice G260/262 and all other neutral and non-corrosive gases (others upon request).
Other Model Medenus Valve
- Medenus Safety Shut-Off Valve
- Medenus Gas Ball Valve
- Medenus Turbine Meters
Other Medenus Valve
Detail Specification
| Nominal size | Rp 1“ (DN 25), Rp 1½“ (DN 40), Rp 2“ (DN 50) (NPT thread on request) |
| Model | Integral pressure-tight (IS) |
| Materials | Al cast alloy |
| Temperature | -20°C to +60°C |
| Connection type | Internal thread acc. to EN 10226-1 |
