Smart Valve Positioner
YT-3750 Positioner
YTC Smart Positioner
YT-3700 / 3750 series Smart Valve Positioner accurately controls valve stroke in response to an input signal of 4~20mA from the controller.
YTC Features :
- Low air consumption
- Installed even in the field
- User will easily understand
- High vibration environment
- Increase the safety of system
- Optimize operating conditions
Other YTC Series :
Detail Specification
Input Signal | 4 to 20 mA DC |
Supply Pressure | 0,14 to 0,7 MPa/1,4 to 7 bar/20 to 102 psi |
Linear Type | 10 to 150 mm (0,4" to 6") |
Rotary Type | 55 to 110 |
Impedance | max 500 ohm, 20 MA DC |
YT-3700 Positioner
YTC Smart Positioner
YT-3700 / 3750 series Smart Valve Positioner accurately controls valve stroke in response to an input signal of 4~20mA from the controller.
Power Genex Features :
- Can minimize the travel
- Very low air consumption
- Method of using 4 buttons
- Positioner operates normally
- Momentary blackout happens
- Boot-time only take 0.5 second
Other YTC Series :
Detail Specification
Air Connection | RC 1/4, 1/4 NPT, G 1/4 |
Gauge Connection | RC 1/8, 1/8 NPT |
Conduit | G 1/2, M20, 1/2 NPT |
Standard Type | -30°C to 85 °C(-22 °F to 185 °F) |
Low Temp Type | -40°C to 85 °C(-40 °F to 185 °F) |
YT-3700 Positioner
YTC Smart Positioner
YT-3700 / 3750 series Smart Valve Positioner accurately controls valve stroke in response to an input signal of 4~20mA from the controller.
Power Genex Features :
- Can minimize the travel
- Very low air consumption
- Method of using 4 buttons
- Positioner operates normally
- Momentary blackout happens
- Boot-time only take 0.5 second
Other YTC Series :
Detail Specification
Air Connection | RC 1/4, 1/4 NPT, G 1/4 |
Gauge Connection | RC 1/8, 1/8 NPT |
Conduit | G 1/2, M20, 1/2 NPT |
Standard Type | -30°C to 85 °C(-22 °F to 185 °F) |
Low Temp Type | -40°C to 85 °C(-40 °F to 185 °F) |
YT-3300 Positioner
YTC Smart Positioner
YT-3300 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- LCD display
- Auto calibration
- Feedback signal
- Auto/Manual switch
- HART comunication
- 4 buttons for local control
Other YTC Series :
Detail Specification
LCD Operating | -30°C to 85 °C(-22 °F to 185 °F) |
Linearity | 0,5% F.S |
Hysteresis | 0,5% F.S |
Sensitivity | 0,2 % F.S |
Repeatibility | 0,3 % F.S |
YT-3350 Positioner
YTC Smart Positioner
YT-3350 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- Stainless Steel
- Auto calibration
- Feedback signal
- Auto/Manual switch
- HART comunication
- 4 buttons for local control
Other YTC Series :
Detail Specification
Air Consumption | Below 2LPM (sup = 0,14 MPa) |
Flow Capacity | 70 LPM (sup = 0,14 MPa) |
Output Characteristics | Linear |
Material | Stainless Steel |
Ingress Protection | IP66 |
YT-3350 Positioner
YTC Smart Positioner
YT-3350 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- Stainless Steel
- Auto calibration
- Feedback signal
- Auto/Manual switch
- HART comunication
- 4 buttons for local control
Other YTC Series :
Detail Specification
Air Consumption | Below 2LPM (sup = 0,14 MPa) |
Flow Capacity | 70 LPM (sup = 0,14 MPa) |
Output Characteristics | Linear |
Material | Stainless Steel |
Ingress Protection | IP66 |
YT-3303 Positioner
YTC Smart Positioner
YT-3303 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- Calibration
- Allows commands
- Position feedback
- Extreme temperature
- Diagnostics to be sent
- Positive acting pushbuttons
Other YTC Series :
Detail Specification
Input Signal | 4-20 mA DC |
Supply Pressure | 0,14 - 0,7 mA DC |
Communication Options | Hart |
Weight | 2 kg (4,4 lb) |
Explosion Protection Type | ATEX, IECEx, NEPSI, KCs |
YT-3301 Positioner
YTC Smart Positioner
YT-3301 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- Auto calibration
- Feedback signal
- Auto/Manual switch
- Accurately controls valve
- Delivered from controller
- 4 buttons for local control
Other YTC Series :
Detail Specification
Input Signal | 4 to 20 mA DC |
Supply Pressure | 0,14 to 0,7 MPa/1,4 to 7 bar/20 to 102 psi |
Linear Type | 10 to 150 mm (0,4" to 6") |
Rotary Type | 55 to 110 |
Impedance | max 500 ohm, 20 MA DC |
YT-3301 Positioner
YTC Smart Positioner
YT-3301 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- Auto calibration
- Feedback signal
- Auto/Manual switch
- Accurately controls valve
- Delivered from controller
- 4 buttons for local control
Other YTC Series :
Detail Specification
Input Signal | 4 to 20 mA DC |
Supply Pressure | 0,14 to 0,7 MPa/1,4 to 7 bar/20 to 102 psi |
Linear Type | 10 to 150 mm (0,4" to 6") |
Rotary Type | 55 to 110 |
Impedance | max 500 ohm, 20 MA DC |
YT-3400 Positioner
YTC Smart Positioner
YT-3400 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- PID control
- Limit switch
- LCD display
- Feedback signal
- Auto/Manual switch
- 4 buttons for local control
Other YTC Series :
Detail Specification
Air Connection | RC 1/4, 1/4 NPT, G 1/4 |
Gauge Connection | RC 1/8, 1/8 NPT |
Conduit | G 1/2, M20, 1/2 NPT |
Standard Type | -30°C to 85 °C(-22 °F to 185 °F) |
Low Temp Type | -40°C to 85 °C(-40 °F to 185 °F) |
YT-3450 Positioner
YTC Smart positioner
YT-3450 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- Feedback signal
- Auto calibration
- Auto/Manual switch
- HART comunication
- 4 buttons for local control
- Delivered from controller
Other YTC Series :
Detail Specification
LCD Operating | -30°C to 85 °C(-22 °F to 185 °F) |
Linearity | 0,5% F.S |
Hysteresis | 0,5% F.S |
Sensitivity | 0,2 % F.S |
Repeatibility | 0,3 % F.S |
YT-3450 Positioner
YTC Smart positioner
YT-3450 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- Feedback signal
- Auto calibration
- Auto/Manual switch
- HART comunication
- 4 buttons for local control
- Delivered from controller
Other YTC Series :
Detail Specification
LCD Operating | -30°C to 85 °C(-22 °F to 185 °F) |
Linearity | 0,5% F.S |
Hysteresis | 0,5% F.S |
Sensitivity | 0,2 % F.S |
Repeatibility | 0,3 % F.S |
YT-2500 Positioner
YTC Smart Positioner
YT-2500 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- Auto calibration
- Feedback signal
- Auto calibration
- Fail freeze function
- 4 buttons for local control
- Near zero air consumption level
Other YTC Series :
Detail Specification
Air Consumption | 0,01 LPM (sup - 0,14 MPa) |
Flow Capacity | 60 LPM (sup = 0,14 MPa) |
Output Characteristics | Linear |
Material | Stainless Steel |
Ingress Protection | IP66 |
YT-2550 Positioner
YTC Smart Positioner
YT-2550 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- PD control
- Limit switch
- LCD display
- Auto calibration
- Fail freeze function
- Near zero air consumption level
Other YTC Series :
Detail Specification
Input Signal | 4-20 mA DC |
Supply Pressure | 0,14 - 0,7 mA DC |
Communication Options | Hart |
Weight | 2,9 kg (6,4 lb) |
Explosion Protection Type | ATEX, IECEx, NEPSI, KCs |
YT-2550 Positioner
YTC Smart Positioner
YT-2550 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- PD control
- Limit switch
- LCD display
- Auto calibration
- Fail freeze function
- Near zero air consumption level
Other YTC Series :
Detail Specification
Input Signal | 4-20 mA DC |
Supply Pressure | 0,14 - 0,7 mA DC |
Communication Options | Hart |
Weight | 2,9 kg (6,4 lb) |
Explosion Protection Type | ATEX, IECEx, NEPSI, KCs |
YT-2501 Positioner
YTC Smart Positioner
YT-2501 Smart Positioner supplies remote functions and higher liabilities in high temperature and vibration environment.
YTC Features :
- Feedback signal
- HART comunication
- 4 buttons for local control
- Fail freeze & safe function
- Separated feedback module
- Near zero air consumption level
Other YTC Series :
Detail Specification
Input Signal | 4 to 20 mA DC |
Supply Pressure | 0,14 to 0,7 MPa/1,4 to 7 bar/20 to 102 psi |
Linear Type | 10 to 150 mm (0,4" to 6") |
Rotary Type | 55 to 110 |
Impedance | max 500 ohm, 20 MA DC |
YT-2600 Positioner
YTC Smart Positioner
YT-2600 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- Limit switch
- Auto calibration
- Fail freeze function
- HART comunication
- 4 buttons for local control
- Near zero air consumption level
Other YTC Series :
Detail Specification
Air Connection | RC 1/4, 1/4 NPT, G 1/4 |
Gauge Connection | RC 1/8, 1/8 NPT |
Conduit | G 1/2, M20, 1/2 NPT |
Standard Type | -30°C to 80 °C(-22 °F to 176 °F) |
Low Temp Type | -40°C to 80 °C(-40 °C to 70 °C) |
YT-2600 Positioner
YTC Smart Positioner
YT-2600 Smart Valve Positioner accurately controls valve stroke, according to input signal of 4~20mA being delivered from controller.
YTC Features :
- Limit switch
- Auto calibration
- Fail freeze function
- HART comunication
- 4 buttons for local control
- Near zero air consumption level
Other YTC Series :
Detail Specification
Air Connection | RC 1/4, 1/4 NPT, G 1/4 |
Gauge Connection | RC 1/8, 1/8 NPT |
Conduit | G 1/2, M20, 1/2 NPT |
Standard Type | -30°C to 80 °C(-22 °F to 176 °F) |
Low Temp Type | -40°C to 80 °C(-40 °C to 70 °C) |
Electro Pneumatic Positioner
YT-1000 L Positioner
Electro Pneumatic Positioner
The Electro-Pneumatic Positioner YT-1000L is used for operation of pneumatic rotary valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or split ranges.
YTC Features :
- Simple adjustment
- Auto/Manual switch
- Signal of DC 4 to 20mA
- Internal feedback signal
- No resonance between 5-200Hz
- Simple zero and span adjustment
- RA v.s. DA action and 1/2 split range
YTC Series :
Detail Specification
LCD Operating | -30°C to 85 °C(-22 °F to 185 °F) |
Linearity | 1% F.S |
Hysteresis | 1% F.S |
Sensitivity | 0,2 % F.S |
Repeatibility | 0,5 % F.S |
YT-1000 R Positioner
Electro Pneumatic Positioner
The Electro-Pneumatic Positioner YT-1000R is used for operation of pneumatic rotary valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or split ranges.
YTC Features :
- Simple zero
- No resonance
- Span adjustment
- Simple adjustment
- Auto/Manual switch
- Signal of DC 4 to 20mA
- Internal feedback signal is available
Other YTC Series :
Detail Specification
Air Consumption | 2,5 LPM (sup - 0,14 MPa) |
Flow Capacity | 80 LPM (sup = 0,14 MPa) |
Ouutput Characteristics | Linear |
Material | Aluminium Diecasting |
Ingress Protection | IP66 |
YT-1000 R Positioner
Electro Pneumatic Positioner
The Electro-Pneumatic Positioner YT-1000R is used for operation of pneumatic rotary valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or split ranges.
YTC Features :
- Simple zero
- No resonance
- Span adjustment
- Simple adjustment
- Auto/Manual switch
- Signal of DC 4 to 20mA
- Internal feedback signal is available
Other YTC Series :
Detail Specification
Air Consumption | 2,5 LPM (sup - 0,14 MPa) |
Flow Capacity | 80 LPM (sup = 0,14 MPa) |
Ouutput Characteristics | Linear |
Material | Aluminium Diecasting |
Ingress Protection | IP66 |
YT-1050 Positioner
Electro Pneumatic Positioner
YT-1050, the Electro Pneumatic positioner is used for operation of pneumatic valve actuators by means of electrical controller or control system with an analog output signal of DC 4 to 20mA or split ranges.
YTC Features :
- Auto/Manual switch
- Signal of DC 4 to 20mA
- Setting by simple adjustment
- Control system with an analog
- No resonance between 5-200Hz
- Simple zero and span adjustment
- RA v.s. DA action and 1/2 split range
Other YTC Series :
Detail Specification
Input Signal | 4-20 mA DC |
Supply Pressure | 0,14 - 0,7 mA DC |
Communication Options | Hart |
Weight | 5,71 kg (12,6 lb) |
Explosion Protection Type | ATEX, KCs |
Pneumatic-Pneumatic Positioner
YT-1200 L Positioner
YTC 1200 L Pneumatic-Pneumatic Positioner
The Pneumatic Pneumatic Positioner YT-1200L is used for pneumatic linear valve actuators by means of pneumatic controller or control systems with an output signal of 3 to 5 psi or split ranges.
YTC Features :
- Split ranges
- Manual switch
- Span adjustment
- Signal of 3 to 5 psi
- High vibration resistant
- Setting by simple adjustment
- Reverse and Direct Acting Settings
- RA v.s. DA action and 1/2 split range
Other YTC Series :
Detail Specification
Input Signal | 0,02 - 0,1 MPa (0,2 - 1 bar) |
Supply Pressure | 0,14 to 0,7 MPa/1,4 to 7 bar/20 to 102 psi |
Strike | 10 - 150 mm |
Air Connection | PT (NPT) 1/4 |
Air Consumption | 2,5 LPM (sup = 0,14 MPa) |
YT-1200 L Positioner
YTC 1200 L Pneumatic-Pneumatic Positioner
The Pneumatic Pneumatic Positioner YT-1200L is used for pneumatic linear valve actuators by means of pneumatic controller or control systems with an output signal of 3 to 5 psi or split ranges.
YTC Features :
- Split ranges
- Manual switch
- Span adjustment
- Signal of 3 to 5 psi
- High vibration resistant
- Setting by simple adjustment
- Reverse and Direct Acting Settings
- RA v.s. DA action and 1/2 split range
Other YTC Series :
Detail Specification
Input Signal | 0,02 - 0,1 MPa (0,2 - 1 bar) |
Supply Pressure | 0,14 to 0,7 MPa/1,4 to 7 bar/20 to 102 psi |
Strike | 10 - 150 mm |
Air Connection | PT (NPT) 1/4 |
Air Consumption | 2,5 LPM (sup = 0,14 MPa) |
YT-1200 R Positioner
YTC 1200 R Pneumatic – Pneumatic Positioner
The YTC Pneumatic Pneumatic Positioner YT-1200 R is used for pneumatic rotary valve actuators by means of pneumatic controller or control systems with an output signal of 3 to 15 psi or split ranges.
YTC Features :
- Auto
- Simple zero
- Manual switch
- No resonance
- Span adjustment
- setting by simple adjustment
- RA v.s. DA action and 1/2 split range
Other YTC Series :
Detail Specification
Air Connection | RC 1/4, 1/4 NPT, G 1/4 |
Gauge Connection | RC 1/8, 1/8 NPT |
Conduit | G 1/2, M20, 1/2 NPT |
Standard Type | -20°C to 70 °C(-4 °F to 158 °F) |
Stroke | 0 - 90 mm |
IP Converter
YTC IP Converter
YTC Intrinsically Safe Type
YTC IP Converter accurately provides equipments with relevant air pressure, according to input signal of 4~20mA being delivered.
YTC Features :
- Simple zero
- High accuracy
- Explosion Proof
- Feedback Signal
- Analog PID Control
- No effect from mounting
- Tubeless connection of YT-200
Other YTC Series :
Detail Specification
LCD Operating | -30°C to 85 °C(-22 °F to 185 °F) |
Linearity | 0,51% F.S |
Hysteresis | 0,5% F.S |
Sensitivity | 0,2 % F.S |
Repeatibility | 0,3 % F.S |
YTC IP Converter
YTC Intrinsically Safe Type
YTC IP Converter accurately provides equipments with relevant air pressure, according to input signal of 4~20mA being delivered.
YTC Features :
- Simple zero
- High accuracy
- Explosion Proof
- Feedback Signal
- Analog PID Control
- No effect from mounting
- Tubeless connection of YT-200
Other YTC Series :
Detail Specification
LCD Operating | -30°C to 85 °C(-22 °F to 185 °F) |
Linearity | 0,51% F.S |
Hysteresis | 0,5% F.S |
Sensitivity | 0,2 % F.S |
Repeatibility | 0,3 % F.S |
Air Filter Regulator
YTC Air Filter Regulator
YTC Air Filter Regulator Stainless Steel 1/2″ and 1/4″
Air filter regulator suitably reduce plant’s main air supply pressure and supplies to valve positioner(s) or control device(s).
YTC Features :
- Light weight
- 5 micron filter
- Compact size
- Relief function
- Higher than set pressure
- Maintain stable outlet pressure
Other YTC Series :
Detail Specification
Temperature | -20°C to 70 °C(-4 °F to 148 °F) |
Supply Pressure | 1,7 MPa (17 bar) |
Min Filtering Size | 5 micron |
Material | Aluminium Diecasting |
Air Connection | PT (NPT) 1/4 |
YTC Volume Booster
YT-300 Volume Booster
YTC Volume Booster Small Size
Volume booster relay, YT-300 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.
YTC Features :
- Increases accuracy
- Filters dusts in the air
- Safety of control valve
- Built-in 100 mesh screen
- By-passing control enhances
Other YTC Series :
Detail Specification
Supply Pressure | 1 MPa (10 bar) |
Output Pressure | 0,7 MPa (7 bar) |
Linearity | 1 % |
Weight | 0,5 kg - 5 kg |
Material | Stainless Steel and Aluminium Diecasting |
YT-300 Volume Booster
YTC Volume Booster Small Size
Volume booster relay, YT-300 is used in pneumatic control valve which receives positioner’s output signal and supply air pressure actuator to reduce response and adjusting time.
YTC Features :
- Increases accuracy
- Filters dusts in the air
- Safety of control valve
- Built-in 100 mesh screen
- By-passing control enhances
Other YTC Series :
Detail Specification
Supply Pressure | 1 MPa (10 bar) |
Output Pressure | 0,7 MPa (7 bar) |
Linearity | 1 % |
Weight | 0,5 kg - 5 kg |
Material | Stainless Steel and Aluminium Diecasting |
YTC Lock - Up Valve
YTC Lock – Up Valve
YTC Lock Up Valve (Stainless Steel 316) 1/4″
Lock Up Valve, YT-405 sense the main supply pressure and shuts down the air flow when the pressure is lower than setting.
YTC Features :
- Compact size
- Below 0.01MPa
- NO bracket is required
- Higher than set pressure
- Setting by simple adjustment
- Small variation of the pressure
Other YTC Series :
Detail Specification
Signal Pressure | 0,14-0,7 MPa (1,4-7 bar) |
Max Supply Pressure | 1 MPa (10 bar) |
Lock Up Pressure | 0,7 MPa (7 bar) |
Differential Pressure | Below 0,01 MPa (0,1 bar) |
Material | Aluminium Diecasting |
YTC Snap Acting Relay
YTC Snap Acting Relay
YTC YT – 520 Snap Acting Relay 1/4″
YTC Snap Acting Relay YT-520 change the direction of air flow rate from one output port to the another when it senses low air pressure.
YTC Features :
- Built-in 100 mesh screen
- By-passing control enhances
- Able to look actuator in its position
- Stem can be extended and connected
- Switches pressure flows when abnormal pressure detected
Other YTC Series :
Detail Specification
Signal Connection | NPT 1/4 |
Weight | 0,73 kg (1,8 lb) |
Signal Pressure | 1,4 - 7 bar |
Max Supply Pressure | 1 MPa (10 bar) |
Material | Aluminium Diecasting |
YTC Snap Acting Relay
YTC YT – 520 Snap Acting Relay 1/4″
YTC Snap Acting Relay YT-520 change the direction of air flow rate from one output port to the another when it senses low air pressure.
YTC Features :
- Built-in 100 mesh screen
- By-passing control enhances
- Able to look actuator in its position
- Stem can be extended and connected
- Switches pressure flows when abnormal pressure detected
Other YTC Series :
Detail Specification
Signal Connection | NPT 1/4 |
Weight | 0,73 kg (1,8 lb) |
Signal Pressure | 1,4 - 7 bar |
Max Supply Pressure | 1 MPa (10 bar) |
Material | Aluminium Diecasting |
YTC Solenoid Valve
YTC Solenoid Valve
YTC Solenoid Valve YT-720 S and YT-720 D
Explosion proof type 3way solenoid valve, YT-720S series outputs pressure to valves or changes output port direction.
YTC Features :
- High durability
- Connecting wires are easy
- Replacement of coil is easy
- Coil assembly can be rotated
- DC applied in same enclosure
- Can be directly attached on actuator
Other YTC Series :
Detail Specification
Frequency | 50-60 Hz |
Explosion Protection Type | EX d IIC T6 |
Connection | PT (NPT) 1/4 |
Conduit | PF 1/2 (G 1/2) |
Coil Insulation Grade | Class F |
YTC Position Transmitter
YTC Position Transmitter
YTC Electronic Position Transmitter SPTM-5V
Electronic Position Transmitter SPTM-5V senses mechanical position change of stem being on the valve or similar device : and converses to current signal of DC4~20mA outputs.
YTC Features :
- Built-in 100 mesh screen
- High accuracy and reliability
- Signal of DC4~20mA outputs
- Convenient wiring: 2 wire type
- Position Transmitter is simple change for RA v.s. DA action setting
Other YTC Series :
Detail Specification
Input Type | 2 Wire |
Supply Voltage | 9-28 V DC |
Noise Range | 50 MV P.P |
Weight | 0,6 kg (1,3 lb) |
Material | Aluminium Diecasting |
YTC Position Transmitter
YTC Electronic Position Transmitter SPTM-5V
Electronic Position Transmitter SPTM-5V senses mechanical position change of stem being on the valve or similar device : and converses to current signal of DC4~20mA outputs.
YTC Features :
- Built-in 100 mesh screen
- High accuracy and reliability
- Signal of DC4~20mA outputs
- Convenient wiring: 2 wire type
- Position Transmitter is simple change for RA v.s. DA action setting
Other YTC Series :
Detail Specification
Input Type | 2 Wire |
Supply Voltage | 9-28 V DC |
Noise Range | 50 MV P.P |
Weight | 0,6 kg (1,3 lb) |
Material | Aluminium Diecasting |
YTC LImit Switch Box
YTC Limit Switch Box
YTC Limit Switch Box Non-Explosion Type
Visual position indicator, Easy adjustment of cam position, 8 contacts of terminal ports, Dual conduit entries, Compatibility with any rotary motion actuator.
YTC Features :
- Dual conduit entries
- Visual position indicator
- 8 contacts of terminal ports
- Easy adjustment of cam position
- Limit Switch Box compatibility with any rotary motion actuator
Other YTC Series :
Detail Specification
Temperature | -20°C to 80 °C |
Terminal | 8 Points |
Mounting Bracket | NAMUR VDI / VDE 3845, ISO 5211 |
Material | Aluminium Diecasting |
Weight | 880 g |