Related Product
Power Plant
Globe Control Valve
In power plant globe control valve used for many different conditions like, feed water, by pass steam to turbine, fuel gas. These are being frequently used in many areas to control the flow, temperature, pressure, or level of any liquid.
Body Material : A105N, Carbon Steel, Stainless Steel
Pressure Rating : Up to class 2500
Actuating :
Electric and Pneumatic actuator
Feature & Benefit :
Self acting or roboter, Suitable any positioner and actuator
Available Brand : Pentair Valve, Masoneilan,
Flowserve, Hora, Ari armaturen, Samson
Rising Stem Gate Valve
Rising stem gate valve are those valve designs that are operated by pushing or pulling the valve stem, then the valve stem do not rotate. Rising stem gate valves are used when shut off is required and a quick visual indicator of open/closed position is needed.
Size Range : Up to DN 500
Pressure Rating : PN16 - PN40
Body Material : Bronze, Ductile Iron, Carbon Steel
Connection : Flange standard ANSI | JIS | DIN
Operated : Handwheel, Gear operated or Actuated
Application : Steam, Boiler feedwater, Condensate
Safety Valve
Safety valve is a valve that acts as a fail-safe, and safety valve will protection equipment from over pressure. which automatically releases a substance from a boiler, pressure vessel, or other system, when the pressure or temperature exceeds preset limits.
Bellow covering model safety we have to purpose any application and medium.
Controlled safety valve, Diaphragm safety valve, Proportional safety valve, Low lift safety valve
Full lift safety valve, Standard safety valve, Power actuated safety relief valve, Full bore safety valve
Pilot operated pressure relief valve, Balanced safety relief valve, Conventional safety relief valve
Diaphragm Valve
Diaphragm valves are used on shut-off and throttling service for liquids, slurries. The operating parts of the diaphragm valve are isolated from the flow. This makes this valve suitable for viscous flows and also hazardous, abrasive and corrosive flows. Diaphragm valves are available in a wide variety of metals, solid plastics, rubber and glass lining.
Size range : Up to 20 Inch
Pressure | Temperature : Up to 200 psi | 170 C
Connection : Butt-weld, Flange, Screwed, Socket Weld
Diaphragm material : NBR, EPDM, Neoprene, PTFE
Blowdown Valve
Blowdown valve use for removal of water from a boiler. Its purpose is to control boiler water parameters within prescribed limits to minimize scale, corrosion, carryover, and other specific problems. There are two principal types of blowdown, they are intermittent and continuous blowdown valve.
Material : Forged steel, Carbon steel
Pressure : Up to Class 2500
Size Range : Up to 6″ | DN 150
End Connection : Butt weld, Socket weld, Flange
Actuator : Lever, Electrical & Pneumatic Actuator
Control
Valve
Gate
Valve
Safety
Valve
Diaphargm
Valve
Blowdown
Valve
