Victaulic Firelock Series FL-SA-BB Attic Sprinklers
Model FL-SA/BB sprinklers are used to protect the entire width of the attic space. The span of the attic is measured along the floor (or ceiling of floor below) of the attic space from the peak to the intersection of the top chord and bottom chord of the roof trusses
From small diameter to large diameter, PVC Reusable and numerous other options, Victaulic pipe joining couplings products and solutions are the choice of discerning engineers, contractors and site owners.
FireLock Style 005H rigid coupling has a unique, patented angle-pad design which allows the housings to offset while clamping the grooves. By permitting the housings to slide on the angled bolt pads, rigidity is obtained.
The allowable pipe separation dimension shown is for system layout purposes only. Style 109 couplings are considered rigid connections and will not accommodate expansion or contraction of the piping system.
Machine grooved type fittings are joined by the coupling, which is comprised of a two piece cast housings. The sealing is provided by a rubber gasket, internal to the coupling.
From small diameter to large diameter, PVC Reusable and numerous other options, Victaulic pipe joining couplings products and solutions are the choice of discerning engineers, contractors and site owners.
Style 72 outlet couplings are primarily intended for use when flow is out from the outlet. Flow into the outlet must not exceed 7 ft/sec (2.1 m/sec). Not recommended for use with stainless steel pipe.
Series AH1 0.8″/DN20 ID Braided Hose: 31, 36, 48, 60, 72″/790, 914, 1220, 1525, 1830 mm. Note: length includes adapter nipple and 5.75″/140 mm straight reducer.