Process Control & Automation

Process Control & Automation

Process control is a combination of control engineering and with some product in the to achieve a target operation and production, which could not be achieved by human manual control. It is implemented widely in industries such as oil refining, pulp and paper, and power plant.

Related Product

Process Control & Automation

Lift Check Valve

Lift Check valve are self-activating safety valves that permit gases and liquids to flow in only one direction. The purpose of a check valve is to prevent process flow from reversing in the system which could damage equipment or upset the process.

Body Material: PVC, Carbon & Stainless Steel
Size Range: 1/2″ through 4″
Pressure Range : Class 150 - 300
End Connection : Socket,, Threaded, Flange

Trunnion Ball Valve

Trunnion ball valve suitable for larger and higher pressure line in the application including gas pipeline, compressor station, LNG utility and most common using in oil and gas industries, and other application process and industry.

Body Material : A105N, Carbon Steel, Stainless Steel
Ball Material : ENP, Stainless Steel, Super Duplex and other alloy
Operated : Manual lever, Gear operated or Actuated
Feature & Benefit : Full & Reduced port, Quarter-turn design, Double block bleed and Antistatic device


Positioner valve is a device that adjusts the valve actuator’s position based on a control signal. for valve work correct position by increasing or decreasing the air load pressure on the actuator.

Type : Electric positioner, Pneumatic positioner, Pneumatic to pneumatic
Feature : LCD display, PID control, Feedback signal, Limit switch, Auto calibration
Brand : Masoneilan, Siemen, RTK, Arca, Hora, Samson, Fisher

Angle Seat Valve

Angle Seat Valve is designed for economical throttling of flow, and is particularly suitable for on off service of clean fluids. Angle Seat Valve design allows for the valve to be installed in both vertical and horizontal.

Size Range : 3/8″ to 2″
Material : PVC, Bronze, Stainless Steel
Connection : NPT Threaded, Butt Weld, Flanged
Benefit : Integrated pneumatic actuator, Fast valve actuation, Compact assembly

Electric Control Valve

Electric control valves can be configured to perform a wide range of functions such as pressure reducing, pressure sustaining. and these model also suitable for application gas, steam, water, pressure, temperature, and level.

Material Body : Cast Iron, Ductile Iron, Carbon Steel, Stainless Steel, Super Duplex.
Model Option : Globe two way control valve, Three way control valve, Double seat globe control valve.
Control Option : Single loop control, Self acting ( Pressure, Temperature and Level ) control valve.


a brand that suits the power plant industry.

More Details