Kaneko Solenoid Valve
Kaneko Sangyo Solenoid Valve
Kaneko M20 Series Two Way Solenoid Valve
Kaneko’s new M20 Series Two-way Solenoid Valves have been developcd as 3 popular Type for use in The widest range Of applications.
Kaneko Solenoid Valve Features :
- Free installing position
- Small power consumption
- Highly airtight packless type
- Easy maintenance due to
simple construction - Even the general purpose type uses a costly mold coil and maintains high water tightness
Kaneko Valve Other Series :
- Kaneko Solenoid Valve Two Way M22
- Kaneko Solenoid Valve Two Way M30
Detail Specification
| Fluid | water, oil, air, inert gas" |
| Working pressure | Gas 0.05～0.9MPa Liquid0.05～1.6MPa |
| Differential pressure actuated | 0.05MPa or more full-time |
| Fluid temperature | －20℃～60℃ |
| Ambient temperature | －20℃～60℃(That the fluid does not freeze but) |
| Electrical ratings | Continuity |
| The allowable voltage fluctuation rate | ＋10％，－15％ |
Kaneko Sangyo Solenoid Valve
Kaneko M00DU Series Three Way Solenoid Valve
M00DU SERIES Using the double latch option, the valve is operated by means 01 a permanent magnet latch circuit that can be controlled by a momentary current pulse 01 fifty milliseconds.
Kaneko Solenoid Valve Features :
- By power failure
- Changesin operation
- Capable of preventing
- No loss in electric power
- Economical and free from anxiety
Kaneko Valve Other Series :
- Kaneko Solenoid Valve Three Way M50
- Kaneko Solenoid Valve Three Way M55
- Kaneko Solenoid Valve Three Way M00U
Detail Specification
| Fluid | Clean air |
| Fluid temperature | －20～60℃ |
| Ambient temperature | －20～60℃ |
| Duty cycle | 100% Continously rated |
| Electrical Specification | See below |
Kaneko Sangyo Solenoid Valve
Kaneko M00DU Series Three Way Solenoid Valve
M00DU SERIES Using the double latch option, the valve is operated by means 01 a permanent magnet latch circuit that can be controlled by a momentary current pulse 01 fifty milliseconds.
Kaneko Solenoid Valve Features :
- By power failure
- Changesin operation
- Capable of preventing
- No loss in electric power
- Economical and free from anxiety
Kaneko Valve Other Series :
- Kaneko Solenoid Valve Three Way M50
- Kaneko Solenoid Valve Three Way M55
- Kaneko Solenoid Valve Three Way M00U
Detail Specification
| ASME Classes | 150 and 300 |
| Primary seal type | The block-and-bleed and double block-and-bleed |
| Secondary seat seals | Metal-to-Metal |
Kaneko Sangyo Solenoid Valve
Kaneko M15G Series Four Way Single Solenoid Valve
This Kaneko M15G valve is 4 Way Solenoid Valve, pilot operated, 2 positions, Double exhausts for pneumatic pressure, to be used for automatic control of double acting power cylinder or diaphragm valve and other various pneumatic pressure operating devices.
Kaneko Solenoid Valve Features :
- Operates without supply lubricating Oil
- Corrosion proof treatment
Kaneko Valve Other Series :
- Kaneko Four Way Solenoid Valve MT16G
- Kaneko Four Way Solenoid Valve MB15G
- Kaneko Four Way Solenoid Valve MK15G
- Kaneko Four Way Solenoid Valve M65G
- Kaneko Four Way Solenoid Valve M80G
Detail Specification
| Fluid | Cleanair" |
| Working pressure | 0.1 ～ 0.99MPa |
| Duty cycle | 100% Continouly rated |
| Fluid temperature | -20 ～ 60℃ |
| Ambient temperature | -20 ～ 60℃ |
| Operating Volta range | +10，-15％ |
| Standard Voltage | See below |
Kaneko Sangyo Solenoid Valve
Kaneko M15G Series Four Way Single Solenoid Valve
This Kaneko M15G valve is 4 Way Solenoid Valve, pilot operated, 2 positions, Double exhausts for pneumatic pressure, to be used for automatic control of double acting power cylinder or diaphragm valve and other various pneumatic pressure operating devices.
Kaneko Solenoid Valve Features :
- Operates without supply lubricating Oil
- Corrosion proof treatment
Kaneko Valve Other Series :
- Kaneko Four Way Solenoid Valve (Single) MT16G
- Kaneko Four Way Solenoid Valve (Single) MB15G
- Kaneko Four Way Solenoid Valve (Single) MK15G
- Kaneko Four Way Solenoid Valve (Single) M65G
- Kaneko Four Way Solenoid Valve (Single) M80G
Detail Specification
| Fluid | Cleanair" |
| Working pressure | 0.1 ～ 0.99MPa |
| Duty cycle | 100% Continouly rated |
| Fluid temperature | -20 ～ 60℃ |
| Ambient temperature | -20 ～ 60℃ |
| Operating Volta range | +10，-15％ |
| Standard Voltage | See below |
Kaneko Sangyo Solenoid Valve
Kaneko MK15DG Series Four Way Double Solenoid Valve
This Kaneko MK15DG valve is 4 Way Solenoid Valve, pilot operated, 2 positions, Double exhausts for pneumatic pressure, to be used for automatic control of double acting power cylinder or diaphragm valve
Kaneko Solenoid Valve Features :
- Easy maintenance
- Also available as 3 way valve
- Manual button provided as standard
- The main valve is of the spool type that requires no oil lubrication
Kaneko Valve Other Series :
- Kaneko Four Way Solenoid Valve MB15DG
- Kaneko Four Way Solenoid Valve M15DG
- Kaneko Four Way Solenoid Valve M65DG
Detail Specification
| Fluid | Air, Inert Gas |
| Working pressure | 0.12 ～ 0.99MPa |
| Duty cycle | 100% Continouly rated |
| Fluid temperature | -20 ～ 60℃ |
| Ambient temperature | -20 ～ 60℃ |
| Operating Volta range | +10，-15％ |
| Standard Voltage | See below |
Kaneko Sangyo Solenoid Valve
Kaneko MK15DG Series Four Way Double Solenoid Valve
This Kaneko MK15DG valve is 4 Way Solenoid Valve, pilot operated, 2 positions, Double exhausts for pneumatic pressure, to be used for automatic control of double acting power cylinder or diaphragm valve
Kaneko Solenoid Valve Features :
- Easy maintenance
- Also available as 3 way valve
- Manual button provided as standard
- The main valve is of the spool type that requires no oil lubrication
Kaneko Valve Other Series :
- Kaneko Four Way Solenoid Valve MB15DG
- Kaneko Four Way Solenoid Valve M15DG
- Kaneko Four Way Solenoid Valve M65DG
Detail Specification
| Connection Size | From 1/4" to 1" |
| PSI Ratings | From 6,000 PSI to 10,000 PSI |
| Temperature | 240 Deg C / 540 Deg C |
| Bore | 0.21" (5.4mm) |
| Seat | Metal to Metal |
Kaneko Sangyo Solenoid Valve
Kaneko M81 Series Manual Reset Solenoid Valve
This Kaneko M81 valve is 3 Way Solenoid Valve are designed t0 be manual reset by a mechanical button and tripped by a Solenoid
Kaneko Solenoid Valve Features :
- A kind of safety valve Capable of preventing malfunctioning
- Coil and movable core do not come into contact with fluid.
- Easy to operate manually
- Available in two types ― no voltage release and electrically tripped.
Kaneko Valve Other Series :
Detail Specification
| Fluid | Clean air |
| Working pressure | 0 ～ 0.99MPa |
| Duty cycle | 100% Continouly rated |
| Fluid temperature | -20 ～ 60℃ |
| Ambient temperature | -20 ～ 60℃ |
| Operating Volta range | +10，-15％ |
| Standard Voltage | See below |
Kaneko Sangyo Solenoid Valve
Kaneko M81 Series Manual Reset Solenoid Valve
This Kaneko M81 valve is 3 Way Solenoid Valve are designed t0 be manual reset by a mechanical button and tripped by a Solenoid
Kaneko Solenoid Valve Features :
- A kind of safety valve Capable of preventing malfunctioning
- Coil and movable core do not come into contact with fluid.
- Easy to operate manually
- Available in two types ― no voltage release and electrically tripped.
Kaneko Valve Other Series :
Detail Specification
| Fluid | Clean air |
| Working pressure | 0 ～ 0.99MPa |
| Duty cycle | 100% Continouly rated |
| Fluid temperature | -20 ～ 60℃ |
| Ambient temperature | -20 ～ 60℃ |
| Operating Volta range | +10，-15％ |
| Standard Voltage | See below |
Kaneko Sangyo Solenoid Valve
Kaneko BZ11 Series Air-Operated Solenoid valve
This Kaneko BZ11 valve is Air-Operated Solenoid Valve is Emergency valve that are set by introducing signal air pressure and
pushing a palm button.
Kaneko Solenoid Valve Features :
- In an emergency case the valve changes its operating position by spring action
- When signal air pressure disappears the valve changes its operating
position by spring action - When signal air pressure is led again the valve maintains its operating position unless the palm button is pushed
Kaneko Valve Other Series :
- Kaneko Air-Operated Valve BZ10G Series
Detail Specification
| Fluid | Clean air |
| Working pressure | 0～0.99MPa |
| Fluid temperature | -20～60℃ |
| Signal air pressure range | 0.06～0.14MPa |
| Operating Volta range | +10，-15％ |
Kaneko Sangyo Solenoid Valve
Kaneko BZ11 Series Air-Operated Solenoid valve
This Kaneko BZ11 valve is Air-Operated Solenoid Valve is Emergency valve that are set by introducing signal air pressure and
pushing a palm button.
Kaneko Solenoid Valve Features :
- In an emergency case the valve changes its operating position by spring action
- When signal air pressure disappears the valve changes its operating
position by spring action - When signal air pressure is led again the valve maintains its operating position unless the palm
button is pushed
Kaneko Valve Other Series :
- Kaneko Air-Operated Valve
BZ10G Series
Detail Specification
| Connection Size | From 1/4" to 1" |
| PSI Ratings | From 6,000 PSI to 10,000 PSI |
| Temperature | 240 Deg C / 540 Deg C |
| Bore | 0.21" (5.4mm) |
| Seat | Metal to Metal |
Kaneko Liquid Level Gauges
Kaneko Liquid Level Gauges
Kaneko G31 Direct Reading Type Liquid Level Gauges
Kaneko G31 Direct Reading Type Liquid Level Gauge unit can be replaced with liquid left in the tank because the automatic closing type isolating valve remains closed unless the control button is pushed.
Kaneko Liquid Level Features :
- The maximum center-to-center distance is 3,030 mm.
- Illuminators are available for a wide range of applications.
Kaneko Valve Other Series :
- Kaneko Liquid Level Gauges LB Series
- Kaneko Liquid Level Gauges LA Series
- Kaneko Liquid Level Gauges LG Series
- Kaneko Liquid Level Gauges 133 Series
Detail Specification
| Fluid | Oil,Water |
| Max.Working pressure | 0.27MPa(2.67bar) |
| Max.Liquid temperature | 80℃ |
Kaneko Liquid Level Gauges
Kaneko G31 Direct Reading Type Liquid Level Gauges
Kaneko G31 Direct Reading Type Liquid Level Gauge unit can be replaced with liquid left in the tank because the automatic closing type isolating valve remains closed unless the control button is pushed.
Kaneko Liquid Level Features :
- The maximum center-to-center
distance is 3,030 mm. - Illuminators are available for a wide range of applications.
Kaneko Valve Other Series :
- Kaneko Direct Reading Type Liquid Level Gauges LB Series
- Kaneko Direct Reading Type Liquid Level Gauges LA Series
- Kaneko Direct Reading Type Liquid Level Gauges LG Series
- Kaneko Direct Reading Type Liquid Level Gauges 133 Series
Detail Specification
| Fluid | Oil,Water |
| Max.Working pressure | 0.27MPa(2.67bar) |
| Max.Liquid temperature | 80℃ |
Kaneko Liquid Level Gauges
Kaneko Dial Type Remote Transmission KL200 Liquid Level Gauges
Kaneko KL200 Dial Remote Transmission type, we are the ones by which float the float on the liquid surface, measured by the indicator was installed outside the tank
Kaneko Liquid Level Features :
- Suited for side-wall mounting
- General-purpose type adaptable to various specifications
Kaneko Valve Other Series :
- Kaneko Remote Transmission KL700
- Kaneko Remote Transmission KL500
- Kaneko Remote Transmission KL100
- Kaneko Magnet Float Type LM Series
- Kaneko Magnet Float Type Slim Series
Detail Specification
| Measure range | 6～20m |
| Seat | 80A(3″)JIS5K |
| Contact (Microswitch) | Back-mounted type |
Kaneko Liquid Level Gauges
Kaneko Dial Type Remote Transmission KL200 Liquid Level Gauges
Kaneko KL200 Dial Remote Transmission type, we are the ones by which float the float on the liquid surface, measured by the indicator was installed outside the tank
Kaneko Liquid Level Features :
- General-purpose type adaptable to
various specifications - Suited for side-wall mounting
- Only a scale graduated in units of
height is available
Kaneko Valve Other Series :
- Kaneko Dial Type Remote
Transmission KL700 - Kaneko Dial Type Remote
Transmission KL500 - Kaneko Dial Type Remote
Transmission KL100 - Kaneko Magnet Float Type LM Series
- Kaneko Magnet Float Type Slim Series
Detail Specification
| Connection Size | ¼” through to ½” |
| PSI Ratings | From 6,000 PSI to 10,000 PSI |
| Temperature | 240 Deg C / 540 Deg C |
| Bore | 0.21" (5.4mm) |
| Seat | Metal to Metal |
Kaneko Liquid Level Gauges
Kaneko KL600 Dial Field Indicating Type Liquid
Level Gauges
Kaneko KL600 Dial Field Indicating Type, measured by the indicator was installed outside the tank to rise and fall of the liquid surface that occurs during the payout or stake out
of the contents.
Kaneko Liquid Level Features :
- Mountable on top only.
- Different detection systems are available for different applications.
Kaneko Valve Other Series :
- Kaneko Liquid Level Field KL400
- Kaneko Liquid Level Field KL600
- Kaneko Float Switchs LSM Series
- Kaneko Float Switchs LSF Series
Detail Specification
| Measuring range | 0.3～1.2m |
| Seat | Perimeter and bolt pitch are 50A(2″) JIS10K. Special flange of 2-1/2″ (67.5 mm) inside diameter |
| Contact(Microswatch) | Back-Embedded type |
| Contact capacity | AC125V15A |
Kaneko Liquid Level Gauges
Kaneko KL600 Dial Field Indicating Type Liquid
Level Gauges
Kaneko KL600 Dial Field Indicating Type, measured by the indicator was installed outside the tank to rise and fall of the liquid surface that occurs during the payout or stake out of the contents.
Kaneko Liquid Level Features :
- Suited for use with small tanks
in 0.3～1.2 m sizes. - Mountable on top only.
- Different detection systems are available for different applications.
Kaneko Valve Other Series :
- Kaneko Dial Type/Field Indicating
Type KL400 - Kaneko Dial Type/Field Indicating
Type KL600 - Kaneko Float Switchs LSM Series
- Kaneko Float Switchs LSF Series
Detail Specification
| Measuring range | 0.3～1.2m |
| Seat | Perimeter and bolt pitch are 50A(2″) JIS10K. Special flange of 2-1/2″ (67.5 mm) inside diameter |
| Contact(Microswatch) | Back-Embedded type |
| Contact capacity | AC125V15A |
