Diaphragm Valve
ITT Pure-Flo Diaphragm
Pneumatic Valve
ITT Pure-Flo 2-Way
Pneumatic Valves
ITT 2-way diaphragm valves can fit a wide variety of applications using one of ITT’s three valve body types: forged, wrought, or cast.
ITT Pure-Flo Features :
- Design flexibility
- Maintenance-free
- High cycle applications
- Severe duty applications
- Minimizing holdup volumes
- Switch Mounting Bolt Pattern
- Hygienic internals
Other ITT Pure-Flo Series :
- ITT Pure-Flo Diaphragm Valve ISP
- ITT Pure-Flo Diaphragm Valve 903
- ITT Pure-Flo Diaphragm Valve 913
- ITT Pure-Flo Diaphragm Valve 963 Manual
Detail Specification
Size Range | 0.5-2" (DN8-50) |
Operating Modes | Fail Close, Fail Open, Double Acting |
Max Service Pressure | 10 bar (150 psig) |
Max Service Temperature | 150°C (300°F) |
Max Autoclave Temperature | 134°C (273°F) |
ITT Pure-Flo Diaphragm
Pneumatic Valve
ITT Pure-Flo 2-Way
Pneumatic Valves
ITT 2-way diaphragm valves can fit a wide variety of applications using one of ITT’s three valve body types: forged, wrought, or cast.
ITT Pure-Flo Features :
- Design flexibility
- Maintenance-free
- High cycle applications
- Severe duty applications
- Minimizing holdup volumes
- Switch Mounting Bolt Pattern
- Hygienic internals
Other ITT Pure-Flo Series :
- ITT Pure-Flo Diaphragm Valve ISP
- ITT Pure-Flo Diaphragm Valve 903
- ITT Pure-Flo Diaphragm Valve 913
- ITT Pure-Flo Diaphragm Valve 963 Manual
Detail Specification
Size Range | 0.5-2" (DN8-50) |
Operating Modes | Fail Close, Fail Open, Double Acting |
Max Service Pressure | 10 bar (150 psig) |
Max Service Temperature | 150°C (300°F) |
Max Autoclave Temperature | 134°C (273°F) |
ITT Pure-Flo Diaphragm Valve
Diaphragm Valve Integrated Sensing Platform (ISP)
The Integrated Sensing Platform (ISP) delivers valve sensing technology with intelligent design to control and monitor your diaphragm valve.
ITT Pure-Flo Features :
- Highly durable
- Auto calibration
- Reliable to install
- Calibrate and operate
- Well suited for typical industry
- Lightweight plastic with completely
Other ITT Pure-Flo Series :
- ITT Pure-Flo Diaphragm Valve ACS
- ITT Pure-Flo Diaphragm Valve 903
- ITT Pure-Flo Diaphragm Valve 913
- ITT Pure-Flo Diaphragm Valve 963 Manual
Detail Specification
Supply Voltage range | 24 V |
Operating Current | 20 mA |
Full Range Accuracy | 0,5 mm |
Hysteresis | 5 % |
Operating Supply power | 0,6 W |
ITT Pure-Flo
Diaphragm Valve
Diaphragm Valve Integrated Sensing Platform (ISP)
The Integrated Sensing Platform (ISP) delivers valve sensing technology with intelligent design to control and monitor your diaphragm valve.
ITT Pure-Flo Features :
- Highly durable
- Auto calibration
- Reliable to install
- Calibrate and operate
- Well suited for typical industry
- Lightweight plastic with completely
Other ITT Pure-Flo Series :
Detail Specification
Supply Voltage range | 24 V |
Operating Current | 20 mA |
Full Range Accuracy | 0,5 mm |
Hysteresis | 5 % |
Operating Supply power | 0,6 W |
ITT Pure-Flo Diaphragm Valve
ITT Pure-Flo Diaphragm Envizion Valve
The Biopharm industry relies on hygienic diaphragm valves for demanding process applications due to their unique balance of clean-ability, drain-ability and pressure/temperature capability.
ITT Pure-Flo Envizion Features :
- Autoclavable
- Safety lock-pin
- Travel stop
- Weep hole
- Thermal compensation system
- Visual position indication
Other ITT Pure-Flo Series :
- ITT Pure-Flo Diaphragm Valve ACS
- ITT Pure-Flo Diaphragm Valve ISP
Detail Specification
Size Range | 0.5"-4" (DN15-DN100) |
Max Service Pressure | 0.5 – 1": 200 psig (13.8 bar) 1.5 – 2": 175 psig (12.1 bar) 3 – 4": 150 psig (10.3 bar) |
Bonnet Material | Cast iron with coating |
Handwheel Material | Cast iron with coating from 1.5" - 4" (DN40-DN100) |
ITT Pure-Flo Diaphragm Valve
ITT Pure-Flo Diaphragm Envizion Valve
The Biopharm industry relies on hygienic diaphragm valves for demanding process applications due to their unique balance of clean-ability, drain-ability and pressure/temperature capability.
ITT Pure-Flo Size Range :
- ITT Pure-Flo 1” (DN25)
- ITT Pure-Flo 1.5 (DN32/40)
- ITT Pure-Flo 2” (DN50)
- ITT Pure-Flo 2.5” (DN65)
- ITT Pure-Flo 3” (DN80)
- ITT Pure-Flo 4” (DN100)
Other ITT Pure-Flo Series :
- ITT Pure-Flo Diaphragm Valve ACS
- ITT Pure-Flo Diaphragm Valve ISP
Detail Specification
Size Range | 0.5"-4" (DN15-DN100) |
Max Service Pressure | 0.5 – 1": 200 psig (13.8 bar) 1.5 – 2": 175 psig (12.1 bar) 3 – 4": 150 psig (10.3 bar) |
Bonnet Material | Cast iron with coating |
Handwheel Material | Cast iron with coating from 1.5" - 4" (DN40-DN100) |
ITT Pure-Flo Diaphragm Valve
ITT Pure-Flo Diaphragm Valve Block and Bleed
The Block and Bleed Drain (BBD) and Block and Bleed Vent (BBV) valve integrate these three valve into one compact block, minimizing hold up volumes and enhancing cleanability.
ITT Pure-Flo Features :
- Bleed configuration
- Flexible system design
- Enhancing cleanability
- Minimizing hold up volume
- Traditionally three standard
Other ITT Pure-Flo Series :
- ITT Pure-Flo 970
- ITT Pure-Flo Bio Tek
- ITT Pure-Flo Bio Pure
- ITT Pure-Flo Advantage Actuator
Detail Specification
Size Range | 0.5" - 2" (DN15 - 50) |
Materials | 316L ASTM - A479 |
Standard End Connections | 14, 16, 18, 20 Gauge OD tubing |
Materials | DIN 177440, 1.4435 |
End | Flanged |
ITT Pure-Flo Diaphragm Valve
ITT Pure-Flo Diaphragm Valve Block and Bleed
The Block and Bleed Drain (BBD) and Block and Bleed Vent (BBV) valve integrate these three valve into one compact block, minimizing hold up volumes and enhancing cleanability.
ITT Pure-Flo Features :
- Bleed configuration
- Flexible system design
- Enhancing cleanability
- Minimizing hold up volume
- Traditionally three standard
Other ITT Pure-Flo Series :
- ITT Pure-Flo 970
- ITT Pure-Flo Bio Tek
- ITT Pure-Flo Bio Pure
- ITT Pure-Flo Advantage Actuator
Detail Specification
Size Range | 0.5" - 2" (DN15 - 50) |
Materials | 316L ASTM - A479 |
Standard End Connections | 14, 16, 18, 20 Gauge OD tubing |
Materials | DIN 177440, 1.4435 |
End | Flanged |
ITT Pure-Flo Diaphragm Valve
Diaphragm Valve Zero Static Block Body
The new E-Series non-faceted zero static tee maintains the essential functional characteristics of the original zero static valve design while improving the cost effectiveness of block body.
ITT Pure-Flo Type :
- ZSBBVV – Zerostatic Block Body Vertical Tube, Vertical Valve
- ZSBBHV – Zerostatic Block Body Horizontal Tube, Vertical Valve
Other ITT Pure-Flo Series :
- ITT Pure-Flo ISG
- ITT Pure-Flo Tank Bottom
- ITT Pure-Flo Sample and Bleed
- ITT Pure-Flo Zero Static Back to Back
- ITT Pure-Flo Zero Static Down Stream
Detail Specification
Valve size | 0.25" - 2" (DN 8 - 50) |
Run size | 0.5" - 4" (DN 15 - 100) |
Material | 316L ASTM - A479 DN 177440, 1.4435 |
Standard End Connections | 14, 16, 18, 20 Gauge OD tubing DIN/ISO |
End | Screwed |
ITT Pure-Flo Diaphragm Valve
Diaphragm Valve Zero Static Block Body
The new E-Series non-faceted zero static tee maintains the essential functional characteristics of the original zero static valve design while improving the cost effectiveness of block body.
ITT Pure-Flo Type :
- ZSBBVV – Zerostatic Block Body Vertical Tube, Vertical Valve
- ZSBBHV – Zerostatic Block Body Horizontal Tube, Vertical Valve
Other ITT Pure-Flo Series :
- ITT Pure-Flo ISG
- ITT Pure-Flo Tank Bottom
- ITT Pure-Flo Sample and Bleed
- ITT Pure-Flo Zero Static Back to Back
- ITT Pure-Flo Zero Static Down Stream
Detail Specification
Valve size | 0.25" - 2" (DN 8 - 50) |
Run size | 0.5" - 4" (DN 15 - 100) |
Material | 316L ASTM - A479 DN 177440, 1.4435 |
Standard End Connections | 14, 16, 18, 20 Gauge OD tubing DIN/ISO |
End | Screwed |
ITT Pure-Flo Diaphragm Valve
ITT Pure-Flo Diaphragm Valve Sample and Bleed
Pure-Flo Sample and Bleed Valve are available in Sample, Zero Static Sample, and Bleed, and with a number of standard and optional features to best suit your system design.
ITT Pure-Flo Features :
- Effective design
- Smooth operation
- Condensate to be drained
- Can withstand typical cleaning
Other ITT Pure-Flo Series :
- ITT Pure-Flo ISG
- ITT Pure-Flo Tank Bottom
- ITT Pure-Flo Zero Static Block Body
- ITT Pure-Flo Zero Static Back to Back
- ITT Pure-Flo Zero Static Down Stream
Detail Specification
Description | Sample valve |
Inlet/run sizes | ¼ - 4.0” |
End Connections | TC / BW / SPEC |
Outlet sizes | 1/8 – 1/2 |
Code | SV |
ITT Pure-Flo Diaphragm Valve
ITT Pure-Flo Diaphragm Valve Sample and Bleed
Pure-Flo Sample and Bleed Valve are available in Sample, Zero Static Sample, and Bleed, and with a number of standard and optional features to best suit your system design.
ITT Pure-Flo Features :
- Effective design
- Smooth operation
- Condensate to be drained
- Can withstand typical cleaning
Other ITT Pure-Flo Series :
- ITT Pure-Flo ISG
- ITT Pure-Flo Tank Bottom
- ITT Pure-Flo Zero Static Block Body
- ITT Pure-Flo Zero Static Back to Back
- ITT Pure-Flo Zero Static Down Stream
Detail Specification
Description | Sample valve |
Inlet/run sizes | ¼ - 4.0” |
End Connections | TC / BW / SPEC |
Outlet sizes | 1/8 – 1/2 |
Code | SV |
ITT Pure-Flo Diaphragm Valve
ITT Pure-Flo Diaphragm Valve Advantage Actuator
The Advantage is a diaphragm driven, compact, lightweight actuator designed to meet the stringent space constraints of the Bioprocessing and Pharmaceutical Industries.
ITT Pure-Flo Features :
- Resists alcohol
- Caustic washdowns
- Assures positive closure
- Hygienic design complies
- Working parts are isolated
Other ITT Pure-Flo Series :
- ITT Pure-Flo 970
- ITT Pure-Flo Bio Tek
- ITT Pure-Flo Bio Pure
- ITT Pure-Flo Block and Bleed
Detail Specification
Size Range | ½"–2" (DN15-DN50) |
Operating Modes | Fail Close, Fail Open, Double Acting |
Max Service Pressure | 150 psig (10 bar) |
Max Service Temperature | 300°F (150°C) |
Max Actuator Chamber Pressure | 90 psig (6.2 bar) |
ITT Pure-Flo
Diaphragm Valve
TT Pure-Flo Diaphragm Valve Advantage Actuator
The Advantage is a diaphragm driven, compact, lightweight actuator designed to meet the stringent space constraints of the Bioprocessing and Pharmaceutical Industries.
ITT Pure-Flo Features :
- Resists alcohol
- Caustic washdowns
- Assures positive closure
- Hygienic design complies
- Working parts are isolated
Other ITT Pure-Flo Series :
Detail Specification
Size Range | ½"–2" (DN15-DN50) |
Operating Modes | Fail Close, Fail Open, Double Acting |
Max Service Pressure | 150 psig (10 bar) |
Max Service Temperature | 300°F (150°C) |
Max Actuator Chamber Pressure | 90 psig (6.2 bar) |
ITT Pure-Flo Diaphragm Valve
Diaphragm Valve Integral Sterile Access and GMP (ISG)
The ISG combines the functionality of the two most common process fabrications (Sterile Access (SA) and GMP) into one assembly.
ITT Pure-Flo Features :
- Fabrication orientation
- Reducing the dead legs
- Increasing design flexibility
- Simply rotating the assembly
- Minimizing dimensional envelope
Other ITT Pure-Flo Series :
- ITT Pure-Flo Tank Bottom
- ITT Pure-Flo Sample and Bleed
- ITT Pure-Flo Zero Static Block Body
- ITT Pure-Flo Zero Static Back to Back
- ITT Pure-Flo Zero Static Down Stream
Detail Specification
Size Range | 0.5" - 2" (DN15 - 50) |
Materials | 316L ASTM - A479 |
Standard End Connections | 14, 16, 18, 20 Gauge OD tubing |
Materials | DIN 177440, 1.4435 |
End | Flanged |
ITT Pure-Flo Diaphragm Valve
Diaphragm Valve Integral Sterile Access and GMP (ISG)
The ISG combines the functionality of the two most common process fabrications (Sterile Access (SA) and GMP) into one assembly.
ITT Pure-Flo Features :
- Fabrication orientation
- Reducing the dead legs
- Increasing design flexibility
- Simply rotating the assembly
- Minimizing dimensional envelope
Other ITT Pure-Flo Series :
- ITT Pure-Flo Tank Bottom
- ITT Pure-Flo Sample and Bleed
- ITT Pure-Flo Zero Static Block Body
- ITT Pure-Flo Zero Static Back to Back
- ITT Pure-Flo Zero Static Down Stream
Detail Specification
Size Range | 0.5" - 2" (DN15 - 50) |
Materials | 316L ASTM - A479 |
Standard End Connections | 14, 16, 18, 20 Gauge OD tubing |
Materials | DIN 177440, 1.4435 |
End | Flanged |