Globe valve

ZETKAMA
STOP VALVE zGLO FIG.201

Supplier Zetkama Stop Valve zGLO fig. 201

Zetkama Stop Valve

Stop Valve, Ends Threaded, Form Straight

Zetkama offer includes ZGLO globe stop valves used to shut off the flow of refrigerant in industrial installations. Zetkama valve also have a several model of valve too fulfill your environment of valve need.

Zetkama Features
  • High tightness
  • Compact settlement
  • Environment-friendly
Application
  • Industry
  • Heating
Figure Number
MaterialGrey cast iron
Nominal pressure16 bar
Nominal diameter10-50 mm
Temperature range-10...+200°C
Working positionAny


Zetkama Stop Valve

Bellow Sealed Stop Valve, Ends Threaded, Form Straight

Additionally we provide shut-off and non-return versions, which are used both to close and open.

Zetkama Body Material
  • A: Grey Cast Iron
  • C: Nodular Cast Iron
  • E: Bronze
  • F: Cast Steel
Zetkama Features
  • Flanges drilled according to EN 1092-2 for body material A, C, E
  • Flanges drilled according to EN 1092-1 for body material F
Figure Number
MaterialGrey cast iron
Nominal pressure6,20,16,25,40 bar
Nominal diameter15-300 mm
Temperature range-10…+400°C
Working positionAny


ZETKAMA
STOP VALVE zGLO FIG.215

Supplier Zetkama Stop Valve zGLO fig. 215

Zetkama Stop Valve

Bellow Sealed Stop Valve, Ends Threaded, Form Straight

Additionally we provide shut-off and non-return versions, which are used both to close and open.

Zetkama Body Material
  • A: Grey Cast Iron
  • C: Nodular Cast Iron
  • E: Bronze
  • F: Cast Steel
Zetkama Features
  • Flanges drilled according to EN 1092-2 for body material A, C, E
  • Flanges drilled according to EN 1092-1 for body material F
Figure Number
MaterialGrey cast iron
Nominal pressure6,20,16,25,40 bar
Nominal diameter15-300 mm
Temperature range-10…+400°C
Working positionAny


ZETKAMA
STOP VALVE zGLO FIG.215

Supplier Zetkama Stop Valve zGLO fig. 215

ZETKAMA
STOP VALVE zGLO FIG.216

Supplier Zetkama Stop Valve zGLO fig. 216

Zetkama Stop Valve

Stop Valve, Ends Flanged, Angle Form

The flow as well as to protect the installation against backflow. Products with a throttle plug can work in intermediate positions between the total opening and closing, which makes it possible to throttle the flow.

Zetkama Features
  • Tests acc. EN – 12266 – 1
  • Flanges drilled according to EN 1092-2
Application
  • Glycol
  • Industrial Water
  • Shipbuilding industry
Figure Number
Material Grey cast iron
Nominal Pressure6,10,16,25 bar
Nominal Diameter15-300 mm
Temperature range-10…+350°C
Working positionAny


Zetkama Stop Valve

Stop Valve, Ends Welded,
Form Straight

Stop valve are used in industrial installations, where the nominal pressure range is between PN6 and PN40, and Tmax is 450 ° C. It is the most versatile group of valves, due to the variety of materials used for the basic structural parts.

Zetkama Features
  • Weld ends according to EN 12627
  • Face-to-face dimension according to EN 558 series 1
Application
  • Diathermic oil
  • Refrigeration and air conditioning
Figure Number
MaterialCast steel
Nominal pressure40 bar
Nominal diameter15-200 mm
Temperature range-60…+450°C
Working positionAny

ZETKAMA
STOP VALVE zGLO
FIG.217

Supplier Zetkama Stop Valve zGLO fig. 217

Zetkama Stop Valve

Stop Valve, Ends Welded,
Form Straight

Stop valve are used in industrial installations, where the nominal pressure range is between PN6 and PN40, and Tmax is 450 ° C. It is the most versatile group of valves, due to the variety of materials used for the basic structural parts.

Zetkama Features
  • Weld ends according to EN 12627
  • Face-to-face dimension according to EN 558 series 1
Application
  • Diathermic oil
  • Refrigeration and air conditioning
Figure Number
MaterialCast steel
Nominal pressure40 bar
Nominal diameter15-200 mm
Temperature range-60…+450°C
Working positionAny

ZETKAMA
STOP VALVE zGLO
FIG.217

Supplier Zetkama Stop Valve zGLO fig. 217

Bellow Seal Globe Valve

ZETKAMA
BELOW SEAL zBEL FIG.235

Supplier Zetkama Bellow Valve zBEL fig. 235

Zetkama Bellow Valve

Bellow Sealed Stop Valve, Ends Flanged, Form Angle

Zetkama offers bellow valves, including stop models, as well as the ones with a throttle plug for the highest efficiency. Zetkama valve also provide various material. in bellow seal valve there’s a view material for bellow seal valve.

Application
  • Steam
  • Neutral fluids
  • Compressed air
Steering
  • Bare shaft
  • Manual operation
Figure Number
MaterialGrey cast iron
Nominal Pressure16,25 bar
Nominal Diameter15-250 mm
Temperature Range-10…+350°C
Working positionAny


Zetkama Bellow Valve

Bellow Sealed Stop Valve, Ends Flanged, Form Straight

Zetkama offers bellow valve, including stop models, as well as the ones with a throttle plug.

Zetkama Body Material
  • A: Grey cast iron
  • C: Nodular cast iron
  • F: Cast steel
  • I: Cast stainless steel
Zetkama Features
  • Flanges drilled according to EN 1092-2 for body material A, C
  • Flanges drilled according to EN 1092-1 for body material F, I
Figure Number
MaterialGrey cast iron
Nominal Pressure16,25,40 bar
Nominal diameter15-250 mm
Temperature range-10…+400°C
Working positionAny
>

ZETKAMA
BELLOW SEAL zBEL FIG.234

Supplier Zetkama Bellow Valve zBEL fig. 234

Zetkama Bellow Valve

Bellow Sealed Stop Valve, Ends Flanged, Form Straight

Zetkama offers bellow valve, including stop models, as well as the ones with a throttle plug.

Zetkama Body Material
  • A: Grey cast iron
  • C: Nodular cast iron
  • F: Cast steel
  • I: Cast stainless steel
Zetkama Features
  • Flanges drilled according to EN 1092-2 for body material A, C
  • Flanges drilled according to EN 1092-1 for body material F, I
Figure Number
Size Range1/4" - 2"
Max Temp-31° C / 816° F
Pressure RatingANSI Class 150 up to 600
MaterialForged Steel, other materials available
EndThreaded or Socket Weld
>

ZETKAMA
BELLOW SEAL zBEL FIG.234

Supplier Zetkama Bellow Valve zBEL fig. 234

Safety Valve

ZETKAMA
SAFETY VALVE zARMAK FIG.570

Supplier Zetkama Safety Valve zARMAK fig. 570

Zetkama Safety Valve

Full Lift Safety Valve, Flanged Ends, Angle Form

Zetkama Full-lift angle weight safety valve with flanged ends. This Product is characterized by a high degree of tightness. Zetkama safety Valve 570 may be applied to systems in which the pressure is from 0.1 to 0.7 bar. All valves are designed for vertical installation.

Zetkama Features
  • High tightness
  • Raised tightness of closure
  • Flange dimension according
    to PN EN 1092 -1
  • Flange dimension according to PN EN1092-2 (depend of body material)
Figure Number
MaterialGrey cast iron
Nominal pressure16,40 bar
Nominal diameter20-150 mm
Temperature range-196…+400°C
Working positionAny

Zetkama Safety Valve

Full Lift Safety Valve, Flanged Ends, Angle Form

Spring-loaded safety valves do not need to be supplied with energy from outside and are therefore an essential element of safety systems, and their task is to protect equipment/pressure systems (boilers, tanks, pipelines, etc.) against excessive pressure above the set limit.

Zetkama Features
  • Quiet work of valve
  • Raised tightness of closure
  • High tightness For valve with soft sealing
  • Protection of disc sealing surface against a lime scale settling as well as against any small mechanical dirt
Figure Number
MaterialGrey cast iron
Nominal pressure16,40,63,100 bar
Nominal diameter20-400 mm
Temperature range-196…+400°C
Working positionVertical

ZETKAMA
SAFETY VALVE zARMAK
FIG.630

Supplier Zetkama Safety Valve zARMAK fig. 630

Zetkama Safety Valve

Full Lift Safety Valve, Flanged Ends, Angle Form

Spring-loaded safety valves do not need to be supplied with energy from outside and are therefore an essential element of safety systems, and their task is to protect equipment/pressure systems (boilers, tanks, pipelines, etc.) against excessive pressure above the set limit.

Zetkama Features
  • Quiet work of valve
  • Raised tightness of closure
  • High tightness For valve with soft sealing
  • Protection of disc sealing surface against a lime scale settling as well as against any small mechanical dirt
Figure Number
MaterialGrey cast iron
Nominal pressure16,40,63,100 bar
Nominal diameter20-400 mm
Temperature range-196…+400°C
Working positionVertical

ZETKAMA
SAFETY VALVE zARMAK
FIG.630

Supplier Zetkama Safety Valve zARMAK fig. 630

ZETKAMA
SAFETY VALVE zARMAK
FIG.775

Supplier Zetkama Safety Valve zARMAK fig. 775

Zetkama Safety Valve

Full Lift Safety Valve, Threaded Ends, Angle Form

Full-lift angle spring safety valve with threaded ends made of nodular cast iron. Zetkama safety valve fig.775 is available in sizes: DN 20-32. It is used for pressures up to 16 bar, and the maximum temperature is 200°C.

Application
  • Steam
  • Glycol
  • Heating
  • Industry
  • Drinking Water
  • Industrial Water
  • Power Engineering
Figure Number
MaterialNodular cast iron
Nominal pressure16 bar
Nominal diameter20-32 mm
Temperature range-10...+200°C
Working positionVertical

Zetkama Safety Valve

Standard Type For Gases and Steam, Sealing Disc EPDM

Free-splined spring safety valve with threaded ends made of brass, produced in diameters: DN 10-25, for working pressures up to 25 (depending on size). Zetkama safety valve is characterized by a high degree of tightness. This product for the outflow of which can be carried directly into the environment without harming the users and the environment.

Application
  • Neutral fluids
  • Compressed air
  • Raised tightness of closure
  • Refrigeration and air conditioning
Figure Number
MaterialBrass
Nominal pressure25 bar
Nominal diameter10-25 mm
Temperature range-30...+120°C
Working positionVertical


ZETKAMA
SAFETY VALVE zARMAK
Fig. 782

Supplier Zetkama Safety Valve zARMAK fig. 782

Zetkama Safety Valve

Standard Type For Gases and Steam, Sealing Disc EPDM

Free-splined spring safety valve with threaded ends made of brass, produced in diameters: DN 10-25, for working pressures up to 25 (depending on size). Zetkama safety valve is characterized by a high degree of tightness. This product for the outflow of which can be carried directly into the environment without harming the users and the environment.

Application
  • Neutral fluids
  • Compressed air
  • Refrigeration and air conditioning
Figure Number
MaterialBrass
Nominal pressure25 bar
Nominal diameter10-25 mm
Temperature range-30...+120°C
Working positionVertical


ZETKAMA
SAFETY VALVE zARMAK
Fig. 782

Supplier Zetkama Safety Valve zARMAK fig. 782

Control Valve

ZETKAMA
CONTROL VALVE zCON
FIG.226

Supplier Zetkama Control Valve zCON fig. 226

Zetkama Control Valve

Pressure Reducing Valve, Straight Shape

Zetkama Control Valve offer includes solutions used to regulate the flow of water in water supply systems, designed and manufactured by company ClaVal. Zetkama Control Valve has a good positioner for valve you need.

Zetkama Features
  • Ecologically safe
  • Compact construction
  • Tests acc. to EN – 12266 – 1
  • High tightness (tightness class – IV acc. to EN – 12266 – 1)
  • Drilled flanges acc. to EN 1092-2 for the A material of the body
Figure Number
MaterialGrey cast iron
Nominal pressure16 bar
Nominal diameter15-150 mm
Temperature range+10...+90°C
Working positionVertical


Check Valve

Zetkama Check Valve

Check Valve, Ends Flanged, Form Y-Type

The largest group of products in Zetkama offer. Zetkama Check valve protect the installation against uncontrolled backflow.

Zetkama Features
  • Silent
  • Full bore
  • Self cleaning
  • Very slight pressure drop
  • Horizontal and vertical instalation
Application
  • Sewage
  • Industrial Water
Figure Number
MaterialNodular cast iron
Nominal pressure10,16 bar
Nominal diameter50-500 mm
Temperature range-10…70°C
Working positionVertical,horizontal

ZETKAMA
CHECK VALVE zCHE FIG.400

Supplier Zetkama Check Valve zCHE fig. 400

Zetkama Check Valve

Check Valve, Ends Flanged, Form Y-Type

The largest group of products in Zetkama offer. Zetkama Check valve protect the installation against uncontrolled backflow.

Zetkama Features
  • Silent
  • Full bore
  • Self cleaning
  • Very slight pressure drop
  • Horizontal and vertical instalation
Application
  • Sewage
  • Industrial Water
Figure Number
MaterialNodular cast iron
Nominal pressure10,16 bar
Nominal diameter50-500 mm
Temperature range-10…70°C
Working positionVertical,horizontal

ZETKAMA
CHECK VALVE zCHE FIG.400

Supplier Zetkama Check Valve zCHE fig. 400

ZETKAMA
CHECK VALVE zCHE
FIG.302

Supplier Zetkama Check Valve zCHE fig. 302

Zetkama Check Valve

Check Valve, Ends Flanged, Form Straight

We prepared models with a throttle plug, flap, ball, two-lever, “Silent” and “Disco” type. Industrial installations and piping systems require the highest quality measures to ensure their proper operation at all times.

Zetkama Features
  • No maintenance
  • Compact settlement
  • Environment-friendly
  • Flanges drilled according to EN 1092-2
  • Closing tightness according to EN 12334
  • Face-to-face dimension according to EN 558 series 48
Figure Number
MaterialGrey cast iron
Nominal pressure16 bar
Nominal diameter40-300 mm
Temperature range-10…300°C
Working positionVertical,horizontal


Zetkama Check Valve

Loose Disc With Spring;
Stem, Disc and Seat Ring Stainless Steel

Zetkama check valve fig.287 the design and used materials allow optimal selection.

Body Material
  • A: Grey cast iron
  • C: Nodular cast iron
  • E: Bronze
  • F: Cast steel
Zetkama Features
  • Flanges drilled according to
    EN 1092-1 for type F
  • Flanges drilled according to
    EN 1092-2 for type A,C
  • Flanges drilled according to
    EN 1092-3 for type E
MaterialGrey cast iron
Nominal pressure 6,10,16,25,40 bar
Nominal diameter15-300 mm
Temperature range-10…400°C
Working positionAny

ZETKAMA
CHECK VALVE zCHE FIG.
287

Supplier Zetkama Check Valvez zCHE fig.287

Zetkama Check Valve

Loose Disc With Spring;
Stem, Disc and Seat Ring Stainless Steel

Zetkama check valve fig.287 the design and used materials allow optimal selection.

Body Material
  • A: Grey cast iron
  • C: Nodular cast iron
  • E: Bronze
  • F: Cast steel
Zetkama Features
  • Flanges drilled according to
    EN 1092-1 for type F
  • Flanges drilled according to
    EN 1092-2 for type A,C
  • Flanges drilled according to
    EN 1092-3 for type E
MaterialGrey cast iron
Nominal pressure 6,10,16,25,40 bar
Nominal diameter15-300 mm
Temperature range-10…400°C
Working positionAny

ZETKAMA
CHECK VALVE zCHE FIG.
287

Supplier Zetkama Check Valvez zCHE fig.287

ZETKAMA
CHECK VALVE zCHE FIG.
277

Supplier Zetkama Check Valve zCHE fig. 227

Zetkama Check Valve

Check Valve, Ends Threaded, Form Straight

To achieve that we recommend one of many available industrial valves, including bottom, bellow, air release and control ones. Each product has been designed and manufactured according to the industry standards, providing the adequate protection of pipes and
other installation sections.

Application
  • Steam
  • Heating
  • Industry
  • Neutral Fluids
  • Compressed Air
Figure Number
MaterialGrey cast iron
Nominal pressure16 bar
Nominal diameter15-50 mm
Temperature range-10…200°C
Working positionAny

Zetkama Check Valve

Check Valve, Ends Threaded, Form Y-Type

In Zetkama’s offer you can also find liquid level gauges, rubber extension joints and strainers – especially important in systems using fluid contaminated with dirt, corrosion and other unwanted particles. Depending on the chosen model, products are suitable for
work with diathermic oil.

Zetkama Features
  • Silent
  • Full bore
  • Self cleaning
  • Very slight pressure drop
  • Horizontal and vertical instalation
Figure Number
MaterialNodular cast iron
Nominal pressure16 bar
Nominal diameter25-80 mm
Temperature range-10…70°C
Working position Vertical, horizontal

ZETKAMA
CHECK VALVE zCHE FIG.
401

Supplier Zetkama Check Valve zCHE fig. 401

Zetkama Check Valve

Check Valve, Ends Threaded, Form Y-Type

In Zetkama’s offer you can also find liquid level gauges, rubber extension joints and strainers – especially important in systems using fluid contaminated with dirt, corrosion and other unwanted particles. Depending on the chosen model, products are suitable for
work with diathermic oil.

Zetkama Features
  • Silent
  • Full bore
  • Self cleaning
  • Very slight pressure drop
  • Horizontal and vertical instalation
Figure Number
MaterialNodular cast iron
Nominal pressure16 bar
Nominal diameter25-80 mm
Temperature range-10…70°C
Working position Vertical, horizontal

ZETKAMA
CHECK VALVE zCHE FIG.
401

Supplier Zetkama Check Valve zCHE fig. 401

Strainer valve

ZETKAMA
STRAINER
zSTRA
FIG.821

Supplier Zetkama Strainer zSTRA fig. 821

Zetkama Strainer

Strainer, Ends Flanged,
Form Y-Tape

Almost none of the fluids that flow through a pipeline are perfectly clear – free of pollution and other kinds of contamination. Those unwanted particles can cause a major damage
to the whole pipeline system.

Zetkama Features
  • Compact settlement
  • Cleaning of screen without disassembling
  • Closing tightness according
    to EN-12266-1
  • Screen made of stainless steel (from DN 50 with reinforced ring, from DN 150
    with supporting basket)
Figure Number
MaterialGrey cast iron
Nominal pressure6,16,25,40 bar
Nominal diameter15-400 mm
Temperature range-20…+450°C
Working positionAny

ZETKAMA
STRAINER
zSTRA
FIG.821

Supplier Zetkama Strainer zSTRA fig. 821

Zetkama Strainer

Strainer, Ends Flanged,
Form Y-Tape

Almost none of the fluids that flow through a pipeline are perfectly clear – free of pollution and other kinds of contamination. Those unwanted particles can cause a major damage to the whole
pipeline system.

Zetkama Features
  • Compact settlement
  • Cleaning of screen without disassembling
  • Closing tightness according
    to EN-12266-1
  • Screen made of stainless steel (from DN 50 with reinforced ring, from DN 150
    with supporting basket)
Figure Number
MaterialGrey cast iron
Nominal pressure6,16,25,40 bar
Nominal diameter15-400 mm
Temperature range-20…+450°C
Working positionAny

Zetkama Strainer

Strainer, Ends Threaded,
Form Y-Type

zSTRA strainer is an essential element of any properly designed installation. It guarantees the proper functioning of its most sensitive nodes. In a particularly recommended version with a magnetic insert, products capture the ferromagnetic particles found in the medium. This is required for trouble-free operation.

Zetkama Features
  • Compact settlement
  • Environment-friendly
    Tests acc. to EN – 12266 – 1
  • Screen made of stainless steel
  • Cleaning of screen without disassembling
Figure Number
MaterialGrey cast iron
Nominal pressure16 bar
Nominal diameter10-80 mm
Temperature range-10…+200°C
Working positionAny

ZETKAMA
STRAINER
zSTRA FIG.823

Supplier Zetkama Strainer zSTRA fig. 283

Zetkama Strainer Valve

Strainer, Ends Threaded,
Form Y-Type

zSTRA strainer is an essential element of any properly designed installation. It guarantees the proper functioning of its most sensitive nodes. In a particularly recommended version with a magnetic insert, products capture the ferromagnetic particles found in the medium. This is required for trouble-free operation.

Zetkama Features
  • Compact settlement
  • Environment-friendly
    Tests acc. to EN – 12266 – 1
  • Screen made of stainless steel
  • Cleaning of screen without disassembling
Figure Number
MaterialGrey cast iron
Nominal pressure16 bar
Nominal diameter10-80 mm
Temperature range-10…+200°C
Working positionAny

ZETKAMA
STRAINER
VALVE zSTRA FIG.823

Supplier Zetkama Strainer zSTRA fig. 283

Static valve

ZETKAMA
STATIC VALVE zSTA
FIG.224

Supplier Zetkama Static Balancing Valve fig. 224

Zetkama Static Valve

Differential Pressure Regulating Valve,
Y-Type, Flanged

Zetkama Static Balancing Valve is one of the largest manufacturers of industrial Static, globe, gate, check valves in Central and Eastern Europe with own cast iron foundry.

Zetkama Features
  • Balancing plug
  • Closing function
  • Adjustable differential pressure
  • Differential pressure measurement
  • Setting ranges:  20-60 kPa, 40-90 kPa
  • Face-to-face dimension according
    to DIN 3202 series M4
Figure Number
MaterialGrey cast iron
Nominal pressure16 bar
Nominal diameter65-150 mm
Temperature range-10…+120°C
Working positionVertical,horizontal

Zetkama Static Valve

Balancing Valve, Grooved Ends, Form Y-Type

Depending on the chosen model, products are suitable for work with compressed air,
steam and refrigerants.

Zetkama Features
  • Industrial Water
  • Compressed Air
  • Compact settlement
  • Environment-friendly
  • Face-to-face dimension according
    to EN 558 series 1
  • Tests according to EN – 12266 – 1
  • High tightness (leakproofness class – A according to EN – 12266 – 1)
Figure Number
MaterialGrey cast iron
Nominal pressureANSI CLASS 150
Nominal diameter40-300 mm
Temperature range-10…+120°C
Working positionAny

ZETKAMA
STATIC VALVE
GROOVED ENDS

Supplier Zetkama Static Balancing Valve fig. 447

Zetkama Static Valve

Balancing Valve, Grooved Ends, Form Y-Type

Depending on the chosen model, products are suitable for work with compressed air,
steam and refrigerants.

Zetkama Features
  • Industrial Water
  • Compressed Air
  • Compact settlement
  • Environment-friendly
  • Face-to-face dimension according
    to EN 558 series 1
  • Tests according to EN – 12266 – 1
  • High tightness (leakproofness class – A according to EN – 12266 – 1)
Figure Number
MaterialGrey cast iron
Nominal pressureANSI CLASS 150
Nominal diameter40-300 mm
Temperature range-10…+120°C
Working positionAny

ZETKAMA
STATIC VALVE
GROOVED ENDS

Supplier Zetkama Static Balancing Valve fig. 447

ZETKAMA
STATIC VALVE
ENDS FLANGED

Supplier Zetkama Static Balancing Valve fig. 447

Zetkama Static Valve

Balancing Valve, Ends Flanged, Form Y-Type

Depending on the chosen model, products are suitable for work with diathermic oil, industrial water, compressed air, steam and refrigerants, thanks to the usage of materials such as stainless steel and galvanized carbon steel.

Zetkama Features
  • Manual operation
  • Industrial Water
  • Compressed Air
  • Flanges ANSI drilled according to ASME B16.1 class 125
  • face-to-face dimension according
    to EN 558 series 1
Figure Number
MaterialGrey cast iron
Nominal pressure16 bar
Nominal diameter40-400 mm
Temperature range-10…+120°C
Working positionAny

Gate valve

Zetkama Gate Valve

Gate Valve, Ends Flange,
Form Straight

Zetkama Gate valve are delivered with a handwheel. Zetkama Gate Valve  are also ready for drive assembly and do not require special modifications. Zetkama Product provide high tightness and are made of solid, durable materials, like nodular cast iron or grey cast iron.

Zetkama Features
  • Coating thickness: 300µm
  • Prepared for actuator mounting
  • Flange end connections: EN-1092-2
  • Fusion bonded epoxy coating RAL 5002
  • High tightness (leakproofness class – A acc. EN -12266 – 1)
Figure Number
MaterialNodular cast iron
Nominal pressure16 bar
Nominal diameter40-600 mm
Temperature range-10...+70°C
Working positionAny

ZETKAMA
GATE VALVE zGAT
FIG.111

Supplier Zetkama Gate Valve zGAT fig. 111

Zetkama Gate Valve

Gate Valve, Ends Flange,
Form Straight

Zetkama Gate valve are delivered with a handwheel. Zetkama Gate Valve  are also ready for drive assembly and do not require special modifications. Zetkama Product provide high tightness and are made of solid, durable materials, like nodular cast iron or grey cast iron.

Zetkama Features
  • Coating thickness: 300µm
  • Prepared for actuator mounting
  • Flange end connections: EN-1092-2
  • Fusion bonded epoxy coating RAL 5002
  • High tightness (leakproofness class – A acc. EN -12266 – 1)
Figure Number
MaterialNodular cast iron
Nominal pressure16 bar
Nominal diameter40-600 mm
Temperature range-10...+70°C
Working positionAny

ZETKAMA
GATE VALVE zGAT
FIG.111

Supplier Zetkama Gate Valve zGAT fig. 111

ZETKAMA
GATE VALVE zGAT
FIG.112 

Supplier Zetkama Gate Valve zGAT fig. 112

Zetkama Gate Valve

Inside Threaded Stem; Smooth Port; Cast Iron/NBR Wedge; Epoxy Paint

Elements presented below are designed to block or start the flow of industrial fluids or gases in pipelines like fire protection, agriculture or sewage installations. Zetkama Gate valve are not suited to be used as control elements.

Zetkama Features
  • Coating tightness: 250µm.
  • Drilling of flanges PN 10/16
  • Face of face dimensions: series F5 acc.
    to DIN 3202
  • Flange and connections:
    EN-1092-2, DIN 2501
Figure Number
MaterialNodular cast iron
Nominal pressure16 bar
Nominal diameter40-300 mm
Temperature range -10...+40°C
Working positionAny

ZETKAMA
GATE VALVE zGAT
FIG.112 

Supplier Zetkama Gate Valve zGAT fig. 112

Zetkama Gate Valve

Inside Threaded Stem; Smooth Port; Cast Iron/NBR Wedge; Epoxy Paint

Elements presented below are designed to block or start the flow of industrial fluids or gases in pipelines like fire protection, agriculture or sewage installations. Zetkama Gate valve are not suited to be used as
control elements.

Zetkama Features
  • Coating tightness: 250µm.
  • Drilling of flanges PN 10/16
  • Face of face dimensions: series F5 acc.
    to DIN 3202
  • Flange and connections:
    EN-1092-2, DIN 2501
Figure Number
MaterialNodular cast iron
Nominal pressure16 bar
Nominal diameter40-300 mm
Temperature range -10...+40°C
Working positionAny

Zetkama Gate Valve

Flat Wedge Gate Valve, Flanged Ends, Straight Form

They should work in completely open or completely closed position. An intermediate position is not permitted. The zetkama gate valve permits the flow by lifting a special disc. Electric drive can be assembled directly on gate valve or on extension stem depending on building place of gate valve.

Zetkama Features
  • Drinking Water
  • Face-to-face length according to
    PN EN 558:2008 FTF N.14
  • Gate valve with handwheel can be adapted for electric drive on client’s request
Figure Number
MaterialGrey cast iron
Nominal pressure10 bar
Nominal diameter400-1400 mm
Temperature range -10…+120°C
Working position Vertical

ZETKAMA
GATE VALVE zGAT
FIG.019

Supplier Zetkama Gate Valve zGAT fig. 019

Zetkama Gate Valve

Flat Wedge Gate Valve, Flanged Ends, Straight Form

They should work in completely open or completely closed position. An intermediate position is not permitted. The zetkama gate valve permits the flow by lifting a special disc. Electric drive can be assembled directly on gate valve or on extension stem depending on building place of gate valve.

Zetkama Features
  • Face-to-face length according to
    PN EN 558:2008 FTF N.14
  • Gate valve with handwheel can be adapted for electric drive on
    client’s request
Figure Number
MaterialGrey cast iron
Nominal pressure10 bar
Nominal diameter400-1400 mm
Temperature range -10…+120°C
Working position Vertical

ZETKAMA
GATE VALVE zGAT
FIG.019

Supplier Zetkama Gate Valve zGAT fig. 019

ZETKAMA
GATE VALVE zGAT
FIG.021

Supplier Zetkama Gate Valve zGAT fig. 021

Zetkama Gate Valve

Type Without Bypass With Handwheel; Seat Cast Iron/Cast Iron

Before placing the order, we recommend checking the technical data sheet and the user’s manual provided for each element.

Zetkama Features
  • Face-to-face length according to
    PN EN 558:2008 FTF N.14
  • Depending on building place of gate valve
  • Gate valve has root as well as stem with thread outside of body
  • Wheel for hand operation can be assembled directly on gate valve or on extension stem (type for extension stem)
Figure Number
MaterialGrey cast iron
Nominal pressure10 bar
Nominal diameter400-1400 mm
Temperature range -10…+120°C
Working position Vertical

ZETKAMA
GATE VALVE zGAT
FIG.021

Supplier Zetkama Gate Valve zGAT fig. 021

Zetkama Gate Valve

Type Without Bypass With Handwheel; Seat Cast Iron/Cast Iron

Before placing the order, we recommend checking the technical data sheet and the user’s manual provided for each element.

Zetkama Features
  • Face-to-face length according to
    PN EN 558:2008 FTF N.14
  • Depending on building place of
    gate valve
  • Gate valve has root as well as stem with thread outside of body
  • Wheel for hand operation can be assembled directly on gate valve or on extension stem (type for extension stem)
Figure Number
MaterialGrey cast iron
Nominal pressure10 bar
Nominal diameter400-1400 mm
Temperature range -10…+120°C
Working position Vertical