Manifold
Kerotest Manifold Valve
KL6T & KL6TA 5-Valve 3/8″ Large Bore
The KL6 5-Valve Manifold is designed specifically for natural gas applications, especially for use with recording orifice meters.
Detail Specification
Manifold Styles | Large Bore Manifold |
Body Configurations | Pipe by Flange, Flange by Flange |
Packing Style | Double O-Ring with Backup Rings |
Seat Material | Delrin, Tefzel |
Body Material | 316 Stainless Steel, ASTM A576 Carbon Steel |
Pipe Threads | 1/2-inch FNPT |
Gauge
Kerotest Block & Bleed
Gauge Valve
Kerotest Instrument Valve Double Block & Bleed
These Double Block & Bleed valves are built for applications with pressures up to 20,000 psig (1379 bar). The design combines isolation and venting in a single valve, eliminating the need for tubing and fittings.
Features
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
Kerotest Other Series
Kerotest Block & Bleed
Gauge Valve
Kerotest Instrument Valve Double Block & Bleed
These Double Block & Bleed valves are built for applications with pressures up to 20,000 psig (1379 bar). The design combines isolation and venting in a single valve, eliminating the need for tubing
and fittings.
Features
- One-piece bonnet with a metal-to-metal seal to the valve body below the bonnet threads
- Slotted spring pin to prevent accidental loosening
Kerotest Other Series
Needle Valve
Kerotest/Marsh N-Series Needle Valve
Hard Seat, 316 Stainless Steel
Meets NACE standard MR-01-75 for resistance to sulfide stress cracking. All 316 SST parts are RC 22 or less, meeting safety requirements in petroleum and gas production, pipeline, service and offshore drilling.
Detail Specification
Max Operating Pressure | 10,000 psi (70,000 kPa) |
Min Burst Pressure | 20,000 psi (140,000 kPa) |
Body and Bonnet Material | 316 stainless steel |
Stem Material | 17-4 PH stainless steel |
Connection | National Pipe Thread, meeting specifications of Federal Standard H-28 |
Kerotest/Marsh N-Series
Needle Valve
Hard Seat, 316 Stainless Steel
Kerotest/Marsh “N” Series Needle Valves are used in processing plants, oil and gas production, hydraulic and pneumatic equipment, testing labs—anywhere the flow of fluid must be carefully regulated.
Detail Specification
Max Operating Pressure | 10,000 psi (70,000 kPa) |
Min Burst Pressure | 20,000 psi (140,000 kPa) |
Body and Bonnet Material | 316 stainless steel |
Stem Material | 17-4 PH stainless steel |
Connection | National Pipe Thread, meeting specifications of Federal Standard H-28 |