GWC Italia Cast Body Trunnion Mounted Ball Valve
GWC Italia Ball Valve 2″ – 24″ Class: ASME 150 – 600
GWC Valve produces a full line of API-6D Trunnion Mounted Ball Two-Piece Cast Design. GWC Valves offer a full range of materials in carbon, alloy and stainless steel trim.
Features
- Anti blow-out stem
- 2 Piece Body Ball Valve
- Double block and bleed
- Trunnion Mounted Ball Valve
- Full and Reduced Bore Ball Valve
Stem Standard Features :
The stem is independent from the ball and is not subject to the side load generated by the line pressure acting on the ball.
Detail Specification
Bolting Material | 316SS / 660SS |
Specifications | NACE Cl. III Bolting |
Actuation | Gear Operator w/Locking Device |
Backup Ring Material | Low Temp Buna N |
Seat Insert | Devlon® V |
GWC Italia Cast Body Trunnion Mounted Ball Valve
GWC Italia Ball Valve 2″ – 24″ Class: ASME 150 – 600
GWC Valve produces a full line of API-6D Trunnion Mounted Ball Two-Piece Cast Design. GWC Valves offer a full range of materials in carbon, alloy and
stainless steel trim.
Features
- Anti blow-out stem
- 2 Piece Body Ball Valve
- Double block and bleed
- Trunnion Mounted Ball Valve
- Full and Reduced Bore Ball Valve
Stem Standard Features :
The stem is independent from the ball and is not subject to the side load generated by the line pressure acting on the ball.
Detail Specification
Bolting Material | 316SS / 660SS |
Specifications | NACE Cl. III Bolting |
Actuation | Gear Operator w/Locking Device |
Backup Ring Material | Low Temp Buna N |
Seat Insert | Devlon® V |
GWC Italia Bolted Body Trunnion Mounted Ball Valve
GWC Italia Ball Valve 2″ – 64″ Class: ASME 150 – 2500
GWC produces a full line of API-6D Trunnion Mounted Ball valves in both two/three Piece Forged. We offer a full range of materials in carbon, alloy and stainless steel from general
to severe in application. Including sub sea.
GWC Features
- Anti-static device
- Spring Loaded Seats
- Firesafe to API-607/6FA
- 2-3 Piece Body Ball Valves
- Sealant Injection upon request
GWC Series
Detail Specification
Bolting Material | 316SS / 660SS |
Specifications | NACE Cl. III Bolting |
Actuation | Gear Operator w/Locking Device |
Backup Ring Material | Low Temp Buna N |
Seat Insert | Devlon® V |
GWC Italia Bolted Body Trunnion Mounted Ball Valve
GWC Italia Ball Valve 2″ – 64″ Class: ASME 150 – 2500
GWC produces a full line of API-6D Trunnion Mounted Ball valves in both two/three Piece Forged. We offer a full range of materials in carbon, alloy and stainless steel from general to severe in application. Including sub sea.
GWC Features
- Anti-static device
- Spring Loaded Seats
- Firesafe to API-607/6FA
- 2-3 Piece Body Ball Valves
- Sealant Injection upon request
GWC Series
Detail Specification
Bolting Material | 316SS / 660SS |
Specifications | NACE Cl. III Bolting |
Actuation | Gear Operator w/Locking Device |
Backup Ring Material | Low Temp Buna N |
Seat Insert | Devlon® V |
GWC Italia Top Entry Trunnion Mounted Ball Valve
GWC Italia Ball Valve 2″ – 56″ Class: ASME 150 – 2500
GWC valve full line of API-6D Trunnion Mounted Ball valves Top Entry one piece body design. GWC valve offer a full range of materials in carbon, alloy and stainless steel from general
GWC Features
- NACE MR-01-75
- 1 Piece Body Ball Valve
GWC Series
GWC Italia Top Entry ball valve are used in pipelines, pumping and compression stations, offshore, onshore, subsea and cryogenic as well as abrasive and high temp applications.
Detail Specification
Bolting Material | LTCS / LTCS |
Specifications | NACE Cl. II B7M/2HM Bolting / Firesafe |
Actuation | Gear Operator w/Locking Device |
Body & Adaptor | Xylan ® Coated (CS/LTCS Only) |
Seat Insert | HT4 (PEEK ™ ) |
GWC Italia Welded Body Trunnion Mounted Ball Valve
GWC Italia Ball Valve 2″ – 64″ Class: ASME 150 – 1500
GWC Valve produces a full line of API-6D Trunnion Mounted Ball valves welded body design. GWC valve show a good quality of
valve In a full range of materials
GWC Features
- Granted by the body cover
- Provided as a standard feature
- Extended bonnets are available
- The fire safe sealing on the stem
- The standard anti blow-out feature
- The upper stem gasket can be replaced for maintenance with the valve in service
GWC Series
Detail Specification
Bolting Material | 316SS / 660SS |
Specifications | NACE Cl. III Bolting |
Actuation | Gear Operator w/Locking Device |
Backup Ring Material | Low Temp Buna N |
Seat Insert | Devlon® V |
GWC Italia Welded Body Trunnion Mounted Ball Valve
GWC Italia Ball Valve 2″ – 64″ Class: ASME 150 – 1500
GWC Valve produces a full line of API-6D Trunnion Mounted Ball valves welded body design. GWC valve show a good quality of
valve In a full range of materials
GWC Features
- Granted by the body cover
- Provided as a standard feature
- Extended bonnets are available
- The fire safe sealing on the stem
- The standard anti blow-out feature
- The upper stem gasket can be replaced for maintenance with the valve in service
GWC Series
Detail Specification
Bolting Material | 316SS / 660SS |
Specifications | NACE Cl. III Bolting |
Actuation | Gear Operator w/Locking Device |
Backup Ring Material | Low Temp Buna N |
Seat Insert | Devlon® V |
GWC Italia Compact Body (Twin Ball) Trunnion Mounted
GWC Italia Ball Valve 1″ – 36″ Class: ASME 150 – 2500
Double Block & Bleed GWC valve with two balls in one body to achieve a positive sealing in a compact design. GWC Italia Valve offer a full range of materials in carbon
GWC Features
- 1-3 Piece Body Ball Valve
GWC Series
Double Block and Bleed Features :
This feature permits to check the integrity of the seats without interfering with the operation of the line and the replacement of the upper stem seal with the valve in line.
Detail Specification
Bolting Material | 316SS / 660SS |
Specifications | NACE Cl. III Bolting |
Actuation | Gear Operator w/Locking Device |
Backup Ring Material | Low Temp Buna N |
Seat Insert | Devlon® V |
GWC Italia Flanged Floating Unibody Ball Valve
GWC Italia Ball Valve 1/2″ – 10″ Class: ASME 150 – 600
GWC Floating Ball Valve are designed, constructed, and tested according to API and ASME/ANSI Standards. Other international standards including BS and DIN are also available upon request. GWC ball valve
have an excellent metal to metal seal
Detail Specification
Bolting Material | 316SS / 660SS |
Specifications | NACE Cl. III Bolting |
Actuation | Gear Operator w/Locking Device |
Backup Ring Material | Low Temp Buna N |
Seat Insert | Devlon® V |
GWC Italia Flanged Floating Unibody Ball Valve
GWC Italia Ball Valve 1/2″ – 10″ Class: ASME 150 – 600
GWC Floating Ball Valve are designed, constructed, and tested according to API and ASME/ANSI Standards. Other international standards including BS and DIN are also available upon request. GWC ball valve have an excellent metal to metal seal
Detail Specification
Bolting Material | 316SS / 660SS |
Specifications | NACE Cl. III Bolting |
Actuation | Gear Operator w/Locking Device |
Backup Ring Material | Low Temp Buna N |
Seat Insert | Devlon® V |