Globe Control Valve
Dembla Globe Control Valve Series 1100
Single Seated Globe Control Valve Series 1100
Series 1100 Valve Are Globe Two-Way Single Seated Body Design Valve, Which Satisfy Majority Of Control Applications For Process And Power Industries.
Features
- Precision Controlis its forte
- It is excellent in handling
clean fluids,Gases and Steam - Noise abating Trim designs available
- Anti Cavitaion & flashing
trim designs available - Multi Spring diaphragm
& Compact design
Detail Specification
| Body | Carbon Steel |
| End Connection | Butt weld End - All Size |
| Bonnets | Standard |
Dembla Goble Control Valve Series 2000
Double Seated Globe Control Valve Series 2000
Series 2000 Double seated Globe control Valve incorporates top and bottom plug guiding to provide adequate support against side thrust of the fluid and high resistant to liberation, The valve plug design inherently features the pressure balancing effect to facilitate the high pressure drop capability with
standard actuators.
Features
- The trim is inherently pressure balanced
- It very well handles unclean fluids
Gases and Steam - Low noise trims are also available
Detail Specification
| Body | A 216 Gr WCB |
| Size | DN 25 thru DN 600 |
| Bonnets | Standard |
Dembla Goble Control Valve Series 2000
Double Seated Globe Control Valve Series 2000
Series 2000 Double seated Globe control Valve incorporates top and bottom plug guiding to provide adequate support against side thrust of the fluid and high resistant to liberation, The valve plug design inherently features the pressure balancing effect to facilitate the high pressure drop capability with
standard actuators.
Features
- The trim is inherently pressure balanced
- It very well handles unclean fluids
Gases and Steam - Low noise trims are also available
Detail Specification
| Body | A 216 Gr WCB |
| Size | DN 25 thru DN 600 |
| Bonnets | Standard |
Dembla Globe Control Valve Series 3000
Three Way Globe Control Valve Series 3000
This Series Is Widely Used For Mixing Of Two Fluids Or Diverting Of One Stream In Two Different Directions. The Valve Is Popular For Applications Involving Thermic Fluid, Chilled Water, Brine, Steam And Air.
Features
- When one wants to split the fluid in Two Different directions or mix Two Different streams of fluids to achieve the desired control. This valve can satisfy the application
- Both the characteristics i.e: linear I ON Off are available
Detail Specification
| Design | ASME-B-16.34, SFS EN 12516-2 |
| End Connection | Screwed & Socked-B16.11 |
| Bonnets | Standard |
Dembla Globe Control Valve Series 5000
Angle Globe Control Valve Series 5000
Series 5000 Globe Angle Valves are well suited for high viscous fluids, all type of slurries, sugar cane juice, masecute & powder applications.
Valves are available for on-off & control
duty applications.
Features
- It is most suitable for Severe
Abrasive, Erosive, Slurry applications - Handlesflashing the best
- Wide body cavity provides easy flow
- Valves are available in various material combinations including conformance to NACE MR-01-75
Detail Specification
| Body | Carbon Steel ASTM A216Gr. WCB |
| End Connection | Flanged |
| Bonnets | Standard |
Dembla Globe Control Valve Series 5000
Angle Globe Control Valve Series 5000
Series 5000 Globe Angle Valves are well suited for high viscous fluids, all type of slurries, sugar cane juice, masecute & powder applications.
Valves are available for on-off & control
duty applications.
Features
- It is most suitable for Severe
Abrasive, Erosive, Slurry applications - Handlesflashing the best
- Wide body cavity provides easy flow
- Valves are available in various material combinations including conformance to NACE MR-01-75
Detail Specification
| Body | Carbon Steel ASTM A216Gr. WCB |
| End Connection | Flanged |
| Bonnets | Standard |
Dembla Globe Control Valve Series 1500
Metal Housed Globe Teflon Valve Series 1500
Series 1500MH valves are Globe Two Way Control Valves with all wetted parts in Teflon (P.T.F.E.) material. Body internals are made out of Teflon (P.T.F.E.) bar stock and armoured by ‘Metal’ housing. These valves are highly recommended for handling corrosive liquids and vapours. Plug integral of Teflon (P.T.F.E.) provide tight shut off closure.
Features
- Higher PTFE Valve thickness
as 6mm minimum - The valve design is proven
Detail Specification
| Operating Pressure | 16 Bar Max. |
| Temperature Range | 180 C Max |
| Bonnets | Standard version with Two sets of V-Teflon Gland Packings |
Dembla Globe Control Valve Series 9000
Flush Bottom Globe Control Valve Series 9000
Dembla manufactures Series 9000 Flush Bottom Valve for processed material discharging applications. These valves are mounted on the bottom most portion or at the outlet of vessels, tanks, etc. These valves are more popular in batch industries or pharmaceutical industries.
Features
- Flush Bottom Valves are most popular in Pharma and Industries
for emptying the vessel from bottom - Effective in handling Highly Dense
and Viscous Fluids & Slurry
Detail Specification
| Housing materials | Anodized aluminum Stainless steel 316 |
| Operating temperature | 20°C / +70°C -40°C / +70°C available on request -20°C / +85°C available on request |
| Pilot signal connection | 1/8” NPT |
Dembla Globe Control Valve Series 9000
Flush Bottom Globe Control Valve Series 9000
Dembla manufactures Series 9000 Flush Bottom Valve for processed material discharging applications. These valves are mounted on the bottom most portion or at the outlet of vessels, tanks, etc. These valves are more popular in batch industries or pharmaceutical industries.
Features
- Flush Bottom Valves are most popular in Pharma and Industries
for emptying the vessel from bottom - Effective in handling Highly Dense
and Viscous Fluids & Slurry
Detail Specification
| Housing materials | Anodized aluminum Stainless steel 316 |
| Operating temperature | 20°C / +70°C -40°C / +70°C available on request -20°C / +85°C available on request |
| Pilot signal connection | 1/8” NPT |
Butterfly Valve
Dembla Butterfly Valve
Series 7400
Double Offset Butterfly Valve Series 7400
Dembla High Performance Butterfly Valves are available in Wafer and Lug type designs conforming to API 609 standard. The Disc construction is Double Offset providing excellent controllability, bubble tight shut off, greater seat life and smooth operation. Valves are specially designed for applications in Chemical, Petroleum, Hydro Carbons Processing, Pulp & Paper and HVAC industries.
Features
- Wafer , Lugged and
Double Flanged design
Detail Specification
| Valve Sizes | 2” (50mm) to 80” (2032mm) |
| Ratings | Class 150 , Class 300 ,Equivalent to DIN |
| Body Style | Wafer , Lug, Flanged |
Ball Valve
Dembla Ball Valve Series 8200
Trunnion Ball Valve
Series 8200
Dembla trunion mounted ball valves are produced with advanced design features complying to standards. The valves are side entry type with three piece/ design construction that allows easy maintenance. Series 8200 fo features a rugged design that provides maximum capacity with minimal full open pressure drop.
Features
- Most Popular & Reliable Valve For Isolation & Shut Down Applications
- Three Piece,Two Piece Designs Available
- Internal as well as external
Trunnion design
Detail Specification
| Body | Carbon Steel |
| Gasket | 316SS+Graphite |
| Bonnets | ASTMA105N< |
Dembla Ball Valve Series 8200
Trunnion Ball Valve
Series 8200
Dembla trunion mounted ball valves are produced with advanced design features complying to standards. The valves are side entry type with three piece/ design construction that allows easy maintenance. Series 8200 fo features a rugged design that provides maximum capacity with minimal full open pressure drop.
Features
- Most Popular & Reliable Valve For Isolation & Shut Down Applications
- Three Piece,Two Piece Designs Available
- Internal as well as external
Trunnion design
Detail Specification
| Body | Carbon Steel |
| Gasket | 316SS+Graphite |
| Bonnets | ASTMA105N< |
