Danfoss NRV and NRVH check valves are optimized for use in liquid, suction and hot gas lines in air conditioning applications to ensure correct flow direction. The NRVH valve is especially designed for systems where compressors are connected in parallel.
Danfoss SVL Flexline product platform is targeted to meet industrial refrigeration requirements worldwide. Flexibility above all characterizes the SVL platform. Using just two basic valve housings – a straightway and an angle way – the platform offers five different functions. You will find that this simplicity offers you easy and time saving usage in many processes.
Danfoss SCA-X are check valves with a built-in shut-off valve function. SCA-X valves are avilable in angleway versions. Danfoss SCA-X is equipped with vented cap and has internal backseating enabling the spindle seal to be replaced whilst the valve still under pressure.
Danfoss CHV-X are check valves only. CHV-X are available in both angleway and straightway versions. The valves are designed to open at very low differential pressures, allow favourable flow conditions and are easy to disassemble for inspection and service.
Danfoss 3-way electrical CTR valve marks a break-through in the configuration of the heat reclaim solution, replacing the ball valves that have so far been used to regulate the flow of surplus heat from compressor pack to heat exchanger. CTR prevents pressure peaks in the system eliminating costly system down-time and the risk of insufficient heat supply for store heating and hot water.
Danfoss ICV Flexline guarantees you a reliable, safe and green solution – both now and in the future. The product family consists of an ICS pilot operated control, ICM motor operated control and ICLX 2-step solenoid valve. All valve variants are based on one common valve body to offer outstanding flexibility.
Danfoss ICLX valves can be used in suction lines for opening against high differential pressure, for instance after hot gas defrosting in large industrial refrigeration systems with all normal, non-flammable refrigerants, including ammonia and CO₂.
Danfoss ICM motor operated valves from Danfoss ICV Flexline™ series are quick and simple to handle, install and service due to their low weight and compact design. The valve is designed to regulate the expansion process in liquid lines and to control pressure or temperature in dry and wet suction lines and hot gas lines.
Danfoss ICSH dual position solenoid valve belongs to the ICV family and consists of an ICV housing, an ICS insert together with an ICSH top cover with 2 EVM normally closed solenoid pilots installed in the top cover. ICSH is used in hot gas lines for the opening of hot gas defrost flow to the evaporator in 2 steps. Both steps are activated by a controller or a PLC energizing the magnetic coils in a time delay sequence.
Unmatched freedom is the keyword of Danfoss ICF Flexline valve stations. As part of the Flexline platform, these valve stations are based on a unique modular concept. This multi-ported Danfoss control solution offers you significant savings by substituting a string of valves with just one valve station.
Danfoss AVTA thermostatic operated water valves are used for proportional regulation of water flow quantity in refrigeration plants with water-cooled condensers for condensing pressure regulation purposes. AVTA water regulating valves give modulating regulation of the condensing pressure and so maintain it constant during operation.