Bohmer Ball Valve
Bohmer Ball Valve
Bohmer Fully-Welded Ball Valve All-Round Dependability
Böhmer Fully-Welded ball valve are therefore welded through the entire cross-section. Thus, weakening of the construction, for example by stress corrosion cracking on the weld seams, is actively counteracted.
Bohmer Valve Features :
- No Surfaces liable to corosion
- Desihned for use in critical areas
- Operate reliably even under high pressure
Bohmer Valve Pressure Rating :
- Bohmer Welded Ball Valve DN 32-200
- Bohmer Welded Ball Valve DN 250-400
- Bohmer Welded Ball Valve DN 32-250
- Bohmer Welded Ball Valve DN 300-500
- Bohmer Welded Ball Valve DN 10-100
Detail Specification
| Size | DN 3 – DN 1400 1/8 – 56 Inch |
| Pressure | PN 10 to PN 800 ANSI Class 150 to 2500 |
| Temperature | -180° to +650° C -292° to +1200° F |
Bohmer Ball Valve
Bohmer Fully-Welded Ball Valve All-Round Dependability
Böhmer Fully-Welded ball valve are therefore welded through the entire cross-section. Thus, weakening of the construction, for example by stress corrosion cracking on the weld seams, is actively counteracted.
Bohmer Valve Features :
- No Surfaces liable to corosion
- Desihned for use in critical areas
- Operate reliably even under high pressure
Bohmer Valve Pressure Rating :
- Bohmer Welded Ball Valve DN 32-200
- Bohmer Welded Ball Valve DN
250-400 - Bohmer Welded Ball Valve DN 32-250
- Bohmer Welded Ball Valve DN
300-500 - Bohmer Welded Ball Valve DN 10-100
Detail Specification
| Size | DN 3 – DN 1400 1/8 – 56 Inch |
| Pressure | PN 10 to PN 800 ANSI Class 150 to 2500 |
| Temperature | -180° to +650° C -292° to +1200° F |
Bohmer Ball valve
Bohmer Fully Welded
Ball Valve District
Heating And Steam
Bohmer district heating ball valve for underground installation meet the requirements of the AD technical bulletin (“Merkablatt”) B9 for extruding of pipes.
Bohmer Valve Features :
- From DN125 a trunnion
mounted ball is standard - The square key is included
in the delivery
Bohmer Ball Valve Materials :
- Ball seals: PTFE
- Stem seals: EPDM
- Body: Forged Steel
- Steel Ball: Stainless
- Steel Stem: Stainless Steel
Detail Specification
| Size | DN 6 up to DN1200 (on request up to DN1400) |
| Pressure | up to PN40 |
| Temperature | up to +250°C (on request) |
Bohmer Ball valve
Bohmer Fully Welded
Ball Valve District
Heating And Steam
Bohmer district heating ball valve for underground installation meet the requirements of the AD technical bulletin (“Merkablatt”) B9 for extruding of pipes.
Bohmer Valve Features :
- From DN125 a trunnion
mounted ball is standard - The square key is included
in the delivery
Bohmer Ball Valve Materials :
- Body: Forged Steel
- Steel Ball: Stainless
- Steel Stem: Stainless Steel
- Ball seals: PTFE
- Stem seals: EPDM
Detail Specification
| Size | DN 6 up to DN1200 (on request up to DN1400) |
| Pressure | up to PN40 |
| Temperature | up to +250°C (on request) |
Bohmer Ball Valve
Bohmer Split-Body Ball Valve Experts for Agressive Fluids
Bohmer Split body ball valve up to a nominal diameter of 56 inch are a integral component part of the Böhmer product line. Ball valve of this design are well suited for extremely abrasive and corrosive fluids.
Bohmer Valve Features :
- Designed for maximum load capacity
- Designed for fast and uncomplicated maintenance
Bohmer Valve Series :
- Bohmer Split Body Ball Valve BMG Ver.A
- Bohmer Split Body Ball Valve BMG Ver.B
- Bohmer Split Body Ball Valve BHG Ver.A
- Bohmer Split Body Ball Valve BHG Ver.B
- Bohmer Split Body Ball Valve BHG Ver.C
Detail Specification
| Size | DN 3 – DN 1400 1/8 – 56 Inch |
| Pressuree | PN 10 to PN 800 ANSI Class 150 to 2500 |
| Temperature | -180° to +650° C -292° to +1200° F |
Bohmer Ball Valve
Bohmer Split-Body Ball Valve Experts for Agressive Fluids
Bohmer Split body ball valve up to a nominal diameter of 56 inch are a integral component part of the Böhmer product line. Ball valve of this design are well suited for extremely abrasive and corrosive fluids.
Bohmer Valve Features :
- Designed for fast and uncomplicated maintenance
- Designed for maximum load capacity
Bohmer Valve Series :
- Bohmer Split Body Ball Valve BMG Ver.A
- Bohmer Split Body Ball Valve BMG Ver.B
- Bohmer Split Body Ball Valve BHG Ver.A
- Bohmer Split Body Ball Valve BHG Ver.B
- Bohmer Split Body Ball Valve BHG Ver.C
Detail Specification
| Size | DN 3 – DN 1400 1/8 – 56 Inch |
| Pressuree | PN 10 to PN 800 ANSI Class 150 to 2500 |
| Temperature | -180° to +650° C -292° to +1200° F |
Bohmer Ball Valve
Bohmer Burried Ball Valve Hidden Champion
Bohmer buried pipes are complex in construction and are also subject to strict regulations to protect the environment.
Bohmer Valve Features :
- Great Deal of time and money an make considerable effort
- Offer almost no surfaces
liable to corrosion
Bohmer Valve Options :
- Actuators
- Test connections
- Position indicators
- Sealant injection pipes
- Vent / Drain-connections
- Pressure-relieving extensions
Detail Specification
| Size | DN 3 – DN 1400 1/8 – 56 Inch |
| Pressuree | PN 10 to PN 800 ANSI Class 150 to 2500 |
| Temperature | -180° to +650° C -292° to +1200° F |
Bohmer Ball Valve
Bohmer Burried Ball Valve Hidden Champion
Bohmer buried pipes are complex in construction and are also subject to strict regulations to protect the environment.
Bohmer Valve Features :
- Great Deal of time and money an make considerable effort
- Offer almost no surfaces
liable to corrosion
Bohmer Valve Options :
- Vent / Drain-connections
- Test connections
- Position indicators
- Actuators
- Sealant injection pipes
- Pressure-relieving extensions
Detail Specification
| Size | DN 3 – DN 1400 1/8 – 56 Inch |
| Pressuree | PN 10 to PN 800 ANSI Class 150 to 2500 |
| Temperature | -180° to +650° C -292° to +1200° F |
Bohmer Ball Valve
Bohmer Subsea Ball Valve
The Böhmer Subsea ball valve provide spring supported seats as a standard. The seats are pressed against the ball surface by the spring elements and ensure a tight shut-off at
low line pressure.
Bohmer Valve Features :
- Primary metal seated
- Secondary Soft seated
- Metal to metal seated
- Fire protection
Bohmer Valve Materials :
- Body: ASTM A350 LF2 or ASTM A694 F52 to F65
- Trim: ASTM A350 LF2, Stainless Steel; Duplex
- Sealings: FPM, HNBR, Nylon, PEEK, TCC
Detail Specification
| size | ≤ 36 inch Class 1500 ≤ 48 inch Class 900 ≤ 56 inch Class 150 to 600 |
| Body | ASTM A350 LF2 or ASTM A694 F52 to F65 |
| Trim | ASTM A350 LF2, Stainless Steel; Duplex |
| Sealings | FPM, HNBR, Nylon, PEEK, TCC |
Bohmer Ball Valve
Bohmer Subsea Ball Valve
The Böhmer Subsea ball valve provide spring supported seats as a standard. The seats are pressed against the ball surface by the spring elements and ensure a tight shut-off at
low line pressure.
Bohmer Valve Features :
- Primary metal seated
- Secondary Soft seated
- Metal to metal seated
- Fire protection
Bohmer Valve Materials :
- Body: ASTM A350 LF2 or ASTM A694 F52 to F65
- Trim: ASTM A350 LF2, Stainless
Steel; Duplex - Sealings: FPM, HNBR, Nylon,
PEEK, TCC
Detail Specification
| size | ≤ 36 inch Class 1500 ≤ 48 inch Class 900 ≤ 56 inch Class 150 to 600 |
| Body | ASTM A350 LF2 or ASTM A694 F52 to F65 |
| Trim | ASTM A350 LF2, Stainless Steel; Duplex |
| Sealings | FPM, HNBR, Nylon, PEEK, TCC |
Bohmer Ball Valve
Böhmer DUF Multi-Way Ball Valve Versatile in Every Way
Bohmer DUF Multi-Way Ball valve are used for a variety of purposes. In shipping, for example, they ensure the smooth switching
of alternative fuels.
Bohmer Valve Features :
- Ensure the smooth switching of
alternative fuels - At the production of fine chemicals
- Used within the production lines
Bohmer Valve Series :
- Bohmer Multi-Way Ball Valve DNG
- Bohmer Multi-Way Ball Valve DHG
- Bohmer Multi-Way Ball Valve DUN
- Bohmer Multi-Way Ball Valve DUH
- Bohmer Multi-Way Ball Valve DNF
Detail Specification
| Size Range | Most sizes up to 10" (250mm) |
| Double-acting pneumatic | 50–100 psi (345–690 kPa) |
| Pump and valve capacity | reach 100% capacity at the same time |
Bohmer Ball Valve
Böhmer DUF Multi-Way Ball Valve Versatile in Every Way
Bohmer DUF Multi-Way Ball valve are used for a variety of purposes. In shipping, for example, they ensure the smooth switching
of alternative fuels.
Bohmer Valve Features :
- Ensure the smooth switching of alternative fuels
- At the production of fine chemicals
- Used within the production lines
Bohmer Valve Series :
- Bohmer Multi-Way Ball Valve DNG
- Bohmer Multi-Way Ball Valve DHG
- Bohmer Multi-Way Ball Valve DUN
- Bohmer Multi-Way Ball Valve DUH
- Bohmer Multi-Way Ball Valve DNF
Detail Specification
| Size Range | Most sizes up to 10" (250mm) |
| Double-acting pneumatic | 50–100 psi (345–690 kPa) |
| Pump and valve capacity | reach 100% capacity at the same time |
Bohmer Ball Valve
Bohmer Injection Nozzles For Pipelines And Ball Valve
The performance of injection nozzles of conventional design decreases continuously during their utilization due to sedimentary deposits of the aggresive odorant and the additives in the gas.
Bohmer Valve Features :
- Designed for use with sulfur containing
- Decrease of risk–the connection prevents the direct contact with the odorant
- Decontamination–by flushing the complete valve chain will be cleaned
- Developed vaporizer enables a constant release of the odorant and reduces built up of residues
Bohmer Valve Series :
- Bohmer IDR Injection Nozzle For Pipelines
- Bohmer IDK Injection Nozzle For Ball Valve
Detail Specification
| size | 1–24" (25–600mm) |
| Actuator Options | lever and handwheel actuators. |
| Capacity | High maximum flow capacity |
| Pressure Applications | Ductile Iron plug valves with 250 lb |
Dezurik Balancing Valve
Bohmer Injection Nozzles For Pipelines And Ball Valve
The performance of injection nozzles of conventional design decreases continuously during their utilization due to sedimentary deposits of the aggresive odorant and the additives in the gas.
Bohmer Valve Features :
- Designed for use with sulfur containing
- Decrease of risk–the connection prevents the direct contact
with the odorant - Decontamination–by flushing the complete valve chain will be cleaned
- Developed vaporizer enables a constant release of the odorant and reduces built up of residues
Bohmer Valve Series :
Detail Specification
| size | 1–24" (25–600mm) |
| Actuator Options | lever and handwheel actuators. |
| Capacity | High maximum flow capacity |
| Pressure Applications | Ductile Iron plug valves with 250 lb |
