Diaphragm Valve Type 72

Asahi Diaphragm Valve Type 72 [8,10inch] (200,250mm)

Having a sealed bonnet with an O-ring, prevents rain water or external atmosphere from entering the bonnet, DIAPHRAGM VALVE TYPE 72 can be safelly used outdoors.

Asahi Ball Valve Type 21

Asahi Ball Valve Type 21 [1/2-4inch] (15-100mm)

Featuring a new intregal molded top flange. The BALL VALVE TYPE 21 can easily be converted from the manual to automatic without replacing the body ball valve.

Asahi Ball Valve Type 23 H

Asahi 3-Way Ball Valve Type 23 H [1-1 1/2inch] (25-40mm)

Asahi The 3-Way BALL VALVE TYPE 23H is horizontal model (T port), compact and economic, reversible flow direction, equipped ISO mounting flange.

Asahi Ball Valve Features :

Asahi Butterfly Valve Type 57

Asahi Butterfly Valve Type 57 [1 1/2-14inch] (40-350mm)

The valve body acts as a protector against over tightening to avoid breakage or deformation.

Asahi Butterfly Valve Type 56

Asahi Butterfly Valve Type 56 [16inch] (400mm)

Butterfly Valve Type 56 (16 inch with width 400 mm)  with lever operator butterfly valve which metal parts are reduced as much as possible.

Asahi Butterfly Valve Features :

• Handle lever
• Excellent handling
• With lever operator
• Easy transformation
• Step further to all plastic
• Flexibility of mounting direction

Butterfly Valve Other Series :

Asahi Butterfly Valve Type 75

Asahi Butterfly Valve Type 75 [18-24inch] (450-600mm)

Long stem type and chain drive type are available on special request, excellent sealing performance, newly developed plastic gear box.

Asahi Gate Valve Type S

Gate Valve Type-S (Soft Seal) Outside Screw Round Handle [1 1/2-8inch] (40-200mm)

All wet sections are made of corrosion-resistant material, thus preventing corrosion and turbid water due to rust, The GATE VALVE, made of high impact polyvinyl chloride, can be used for water supply and drainage.

Asahi Gate Valve Type P (Plug)

Gate Valve Type-P (Plug) Round Handle [1 1/4-14inch] (32-350mm)

Being made of synthetic resin, the ASAHI AV GATE VALVE is about 1/5 as heavy as a cast iron gate valve. However, the ASAHI AV GATE VALVE gives the same torque strength as a cast iron gate valve, so it endures high torque.

Asahi Gate Valve Features :

• High corrosion
• Rugged structure
• Impact-resistance
• Easy maintenance
• Flexibility covering

Gate Valve Other Series :

Asahi Stop Valve (1/2-4 inch) 

Asahi Stop Valve (Glove Valve) [1/2-4inch] (15-100mm)

The STOP VALVE has a drain plug G1/4 in diameter which helps to maintain the valve (Sampling is possible by removing the plug).

Asahi Gauge Valve

Asahi Gauge Valve [3/4,1inch] (20,25mm)

The GAUGE VALVE has a drain plug G1/4 in diameter which helps to maintain the valve (Sampling is possible by removing the plug), anti-corrosive diaphragm, helps to maintain the valve and sampling is possible by removing.

Asahi Gauge Valve Features :

Asahi Self Control Valve

Asahi Self Control Valve With Width (15-50mm)

In addition to the intake and discharge ports located sideways in a straight line (horizontal direction), there is also a discharge port on the lateral side (vertical direction), so that the fluid is discharged from the vertically located discharge.