Ari Armaturen Control Valve
Ari Armaturen Control Valve
Pressure Regulating Valve
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure.
Armaturen Ari-Preso Features :
- Spring loaded
- Regulating plug
- Compact design
- Pressure regulating valve
- Straigh through with flanges
Other Ari Armaturen Series :
Detail Specification
| Figure | 12753 |
| Pressure Nominal | PN 16 |
| Diameter Nominal | DN 15 |
| Temperature | -10°C up to 350°C |
| Material | EN-JL1040 |
Ari Armaturen Control Valve
Pressure Regulating Valve
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine
planner to ensure.
Armaturen Ari-Preso Features :
- Spring loaded
- Regulating plug
- Compact design
- Pressure regulating valve
- Straigh through with flanges
Other Ari Armaturen Series :
Detail Specification
| Figure | 12753 |
| Pressure Nominal | PN 16 |
| Diameter Nominal | DN 15 |
| Temperature | -10°C up to 350°C |
| Material | EN-JL1040 |
Ari Armaturen Control Valve
Electric Actuators Ari-Premio
Ari-Premio linier thrust actuators are employed to actuate control or shut-off valve requiring a nominal linier stroke disctance of up to 80 mm and thrust from 2.2 kN to 15 kN.
Armaturen Ari-Premio Features :
- Handwheel
- Enclosure IP 54
- Travel indicator
- Torque-dependent switching off
Other Ari Armaturen Series :
Detail Specification
| Type | Premio 12kN |
| Voltage | 115 V |
| Temperature Rating | -20°C up to 70°C |
| Frequency | 60 hz |
| Current Type | AC |
Ari Armaturen Control Valve
Electric Actuators Ari-Premio
Ari-Premio linier thrust actuators are employed to actuate control or shut-off valve requiring a nominal linier stroke disctance of up to 80 mm and thrust from 2.2 kN to 15 kN.
Armaturen Ari-Premio Features :
- Handwheel
- Enclosure IP 54
- Travel indicator
- Torque-dependent switching off
Other Ari Armaturen Series :
Detail Specification
| Type | Premio 12kN |
| Voltage | 115 V |
| Temperature Rating | -20°C up to 70°C |
| Frequency | 60 hz |
| Current Type | AC |
Ari Armaturen Control Valve
Electric Actuators Ari-Paco
Actuating or shut-off valve are operated with the ARI-PACO linear actuators which have a linear nominal path of up to 20 mm and require a thrust force of 0,85 kN. The linear actuators are adjusted to the thrust forces denoted in the technical data.
Armaturen Ari-Paco Features :
- Travel indicator
- Torque-dependent switching off
Other Ari Armaturen Series :
Detail Specification
| Type | Paco 0,85 D |
| Voltage | 24 V |
| Temperature Rating | 0°C up to 50°C |
| Frequency | 50/60 hz |
| Current Type | DC |
Ari Armaturen Isolation
Ari Armaturen Isolation Valve
Armaturen Globe Valve
Ari-Faba
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve.
Armaturen Ari-Faba Features :
- Chemical version
- External stem thread
- Stop valve with bellows seal
- Guided plug, hardened / stellited
Armaturen Ari-Faba Series :
Detail Specification
| Figure | 35140...153 |
| Pressure Nominal | PN 40 |
| Nominal Diameter | DN 65 |
| Temperature | -60°C up to 450°C |
| Material | 10619+N |
Ari Armaturen
Isolation Valve
Armaturen Globe Valve
Ari-Faba
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings
on the valve.
Armaturen Ari-Faba Features :
- Seat stellited
- Chemical version
- External stem thread
- Stop valve with bellows seal
- Guided plug, hardened / stellited
Armaturen Ari-Faba Series :
Detail Specification
| Figure | 35140...153 |
| Pressure Nominal | PN 40 |
| Nominal Diameter | DN 65 |
| Temperature | -60°C up to 450°C |
| Material | 10619+N |
Ari Armaturen Isolation Valve
Armaturen Butterfly Valve
Ari-Ziva Z
Gear type (actuation by hand wheel, clockwise for closing). The CLOSE-position can be adjusted by 5° by a stop screw. The stop screws are self-sealing and self-locking. Free of maintenance wafer pattern butterfly valve, industrial range.
Armaturen Butterfly Valve Series :
- Armaturen Butterfly Valve Ari-Zesa
- Armaturen Butterfly Valve Ari-Gesa
- Armaturen Butterfly Valve Ari-Ziva G
- Armaturen Butterfly Valve Ari-Zetrix 016
- Armaturen Butterfly Valve Ari-Zetrix 018
- Armaturen Butterfly Valve Ari-Zetrix 019
- Armaturen Butterfly Valve Ari-Zedox 120
- Armaturen Butterfly Valve Ari-Zedox 121
- Armaturen Butterfly Valve Ari-Zedox 122
Detail Specification
| Figure | 22014 |
| Pressure Nominal | PN 16 |
| Nominal Diameter | DN 25/32 |
| Temperature | -10°C up to 80°C |
| Material | EN-JS1030 |
Ari Armaturen
Isolation Valve
Armaturen Butterfly Valve
Ari-Ziva Z
Gear type (actuation by hand wheel, clockwise for closing). The CLOSE-position can be adjusted by 5° by a stop screw. The stop screws are self-sealing and self-locking. Free of maintenance wafer pattern butterfly valve, industrial range.
Armaturen Butterfly Valve Series :
- Armaturen Butterfly Valve
Ari-Zesa - Armaturen Butterfly Valve
Ari-Gesa - Armaturen Butterfly Valve
Ari-Ziva G - Armaturen Butterfly Valve
Ari-Zetrix 016 - Armaturen Butterfly Valve
Ari-Zetrix 018 - Armaturen Butterfly Valve
Ari-Zetrix 019 - Armaturen Butterfly Valve
Ari-Zedox 120 - Armaturen Butterfly Valve
Ari-Zedox 121 - Armaturen Butterfly Valve
Ari-Zedox 122
Detail Specification
| Figure | 22014 |
| Pressure Nominal | PN 16 |
| Nominal Diameter | DN 25/32 |
| Temperature | -10°C up to 80°C |
| Material | EN-JS1030 |
Ari Armaturen Isolation Valve
Armaturen Strainer
Ari-Strainer
The strainer screens must be cleaned regularly. Maintenance and maintenance-intervals have to be defined by the operator and depends on the degree of dirt accumulation in the system.
Armaturen Ari-Strainer Features :
- Combined flow regulating valve
- Straight through with flanges
- Straight through with flanges and special spindle seal
Other Ari Armaturen Series :
- Armaturen Globe Valve Ari-Stobu
- Flow Regulating Valve Ari-Astra
- Flow Regulating Valve Ari-Astra Plus
- Flow Regulating Valve Ari-Astra D
- Flow Regulating Valve Ari-Astra DC
Detail Specification
| Figure | 10050 |
| Pressure Nominal | PN 6 |
| Nominal Diameter | DN 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen Isolation Valve
Armaturen Strainer
Ari-Strainer
The strainer screens must be cleaned regularly. Maintenance and maintenance-intervals have to be defined by the operator and depends on the degree of dirt accumulation in the system.
Armaturen Ari-Strainer Features :
- Combined flow regulating valve
- Straight through with flanges
- Straight through with flanges and special spindle seal
Other Ari Armaturen Series :
- Armaturen Globe Valve Ari-Stobu
- Flow Regulating Valve Ari-Astra
- Flow Regulating Valve Ari-Astra Plus
- Flow Regulating Valve Ari-Astra D
- Flow Regulating Valve Ari-Astra DC
Detail Specification
| Figure | 10050 |
| Pressure Nominal | PN 6 |
| Nominal Diameter | DN 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen Safety Valve
Ari Armaturen Safety Valve
Armaturen Safety Valve
Ari-Safe
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve must be taken into account.
Armaturen Ari-Safe Features :
- Wear resistant seat/disc
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
Other Ari Armaturen Series :
Detail Specification
| Figure | 12901 |
| Pressure Nominal | PN 16 |
| Nominal Diameter | DN 15/25 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen Safety Valve
Armaturen Safety Valve
Ari-Safe
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve must be taken into account.
Armaturen Ari-Safe Features :
- Wear resistant seat/disc
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
Other Ari Armaturen Series :
Detail Specification
| Figure | 12901 |
| Pressure Nominal | PN 16 |
| Nominal Diameter | DN 15/25 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen Safety Valve
Armaturen Safety Valve
Ari-Safe-P
Safety valve are safety devices designed to prevent the pressure in any pressurised system from exceeding the maximum permissible pressure by more than the permissible tolerance.
Armaturen Ari-Safe-P Features :
- Wear resistant seat/disc
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
- Possible with stainless steel bellows
Other Ari Armaturen Series :
Detail Specification
| Figure | 12921 |
| Pressure Nominal | PN 16 |
| Nominal Diameter | DN 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen Safety Valve
Armaturen Safety Valve
Ari-Safe-P
Safety valve are safety devices designed to prevent the pressure in any pressurised system from exceeding the maximum permissible pressure by more than the permissible tolerance.
Armaturen Ari-Safe-P Features :
- Wear resistant seat/disc
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
- Possible with stainless steel bellows
Other Ari Armaturen Series :
Detail Specification
| Figure | 12921 |
| Pressure Nominal | PN 16 |
| Nominal Diameter | DN 15 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
ARI ARMATUREN
SAFETY VALVE
ARI SAFE-P
Ari Armaturen Safety Valve
Armaturen Safety Valve
Ari-Safe-TC
Open safety valve (open bonnet / open cap) are not permissible for fluids, dusty atmospheres, open air use or for any Group 1 fluids in accordance with Pressure Equipment Directive.
Armaturen Ari-Safe-TC Features :
- Direct loaded with spring
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
- Possible with stainless steel bellows
Other Ari Armaturen Series :
Detail Specification
| Figure | 25941 |
| Pressure Nominal | PN 40 |
| Nominal Diameter | G1" XG1 1/2" |
| Temperature | -10°C up to 350°C |
| Material | EN-JS1049 |
Ari Armaturen Safety Valve
Safety Valve Ari Safe-TC
Open safety valve (open bonnet / open cap) are not permissible for fluids, dusty atmospheres, open air use or for any Group 1 fluids in accordance with Pressure
Equipment Directive.
Armaturen Ari-Safe-TC Features :
- Direct loaded with spring
- Possible with soft seal disc
- Possible with EPDM bellows
- Precision disc alignment and guide
- Possible with stainless steel bellows
Other Ari Armaturen Series :
Detail Specification
| Figure | 25941 |
| Pressure Nominal | PN 40 |
| Nominal Diameter | G1" XG1 1/2" |
| Temperature | -10°C up to 350°C |
| Material | EN-JS1049 |
Ari Armaturen Steam Trapping
Ari Armaturen Steam Trapping
Armaturen Steam Trap
Ari-Cona M
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve must be taken into account.
Armaturen Ari-Cona M Features :
- Installation in any position
- Exact control characteristic
- Integrated non return protection
- Optimized design for quick installation
Other Ari Armaturen Series :
Detail Specification
| Figure | 12610-1 |
| Pressure Nominal | 16 |
| Nominal Diameter | 25 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
Ari Armaturen Steam Trap
Armaturen Steam Trap
Ari-Cona M
The information complies to the Pressure Equipment Directive 2014/68/EU. It is the responsibility of the machine planner to ensure compliance. The special markings on the valve must be taken into account.
Armaturen Ari-Cona M Features :
- Installation in any position
- Exact control characteristic
- Integrated non return protection
- Optimized design for quick installation
Other Ari Armaturen Series :
Detail Specification
| Figure | 12610-1 |
| Pressure Nominal | 16 |
| Nominal Diameter | 25 |
| Temperature | -10°C up to 300°C |
| Material | EN-JL1040 |
ARI ARMATUREN
STEAM TRAP
ARI CONA-M
Ari Armaturen Steam Trapping
Armaturen Steam Trap
Ari-Cona TD
In the event of malfunction or faulty operating performance check that the installation and adjustment work has been carried out and completed in accordance with these Operating Instructions properly.
Armaturen Ari-Cona TD Features :
- Installation in any position
- Intermittent mode of operation
- Optimized design for quick installation
Other Ari Armaturen Series :
- Armaturen Steam Trap Ari-Cona P
- Armaturen Ari-Cona Connector
- Armaturen Ari-Cona Liquid Drainer
- Armaturen Manifolds Ari-Codi S
- Armaturen Manifolds Ari-Codi B
Detail Specification
| Figure | 45640-2 |
| Pressure Nominal | 40 |
| Nominal Diameter | Rp/BSP 1 |
| Temperature | -60°C up to 450°C |
| Material | 10460 |
Ari Armaturen Steam Trap
Armaturen Steam Trap
Ari-Cona TD
In the event of malfunction or faulty operating performance check that the installation and adjustment work has been carried out and completed in accordance with these Operating Instructions properly.
Armaturen Ari-Cona TD Features :
- Installation in any position
- Intermittent mode of operation
- Optimized design for quick installation
Other Ari Armaturen Series :
- Armaturen Steam Trap Ari-Cona P
- Armaturen Ari-Cona Connector
- Armaturen Ari-Cona Liquid Drainer
- Armaturen Manifolds Ari-Codi S
- Armaturen Manifolds Ari-Codi B
Detail Specification
| Figure | 45640-2 |
| Pressure Nominal | 40 |
| Nominal Diameter | Rp/BSP 1 |
| Temperature | -60°C up to 450°C |
| Material | 10460 |
Ari Armaturen Steam Trapping
Armaturen Steam Trap
Ari-Cona All-In-One
At -20°C to +65°C, The paint is a base coat to protect against corrosion during transportation and storage. Do not damage paint protection, Back pressure-free condensate discharge.
Armaturen Ari-Cona Features :
- Integrated non return protection
- Optimized design for quick installation
- Gasket-free sealing of the screwed cap
- Mounting position verical or horizontal
- Back pressure-free condensate discharge
Other Ari Armaturen Series :
Detail Specification
| Figure | 4560A-1 |
| Pressure Nominal | 40 |
| Nominal Diameter | 15 |
| Temperature | -10°C up to 450°C |
| Material | 10460 |
Ari Armaturen Steam Trapping
Armaturen Steam Trap
Ari-Cona All-In-One
At -20°C to +65°C, The paint is a base coat to protect against corrosion during transportation and storage. Do not damage paint protection, Back pressure-free condensate discharge.
Armaturen Ari-Cona Features :
- Integrated non return protection
- Optimized design for quick installation
- Gasket-free sealing of the screwed cap
- Mounting position verical or horizontal
- Back pressure-free condensate discharge
Other Ari Armaturen Series :
Detail Specification
| Figure | 4560A-1 |
| Pressure Nominal | 40 |
| Nominal Diameter | 15 |
| Temperature | -10°C up to 450°C |
| Material | 10460 |
ARI ARMATUREN
STEAM TRAP
CONA ALL
IN ONE
